Edelbrock RPM with automatic transmission

[340_duster]

Looking for ideas on how to connect a Edelbrock RPM air gap manifold with a Holley 4160 to the throttle cable and kickdown lever. Trying to use factory linkage, but we are open to ideas of aftermarket. Thanks

 

[forphorty]

Throttle Bracket Kits | AR Engineering

 

[65 Cuda 340]

Not a problem. You DO need the Holley Mopar throttle adapter if you don't already have it. Holley 20-7 Holley Throttle Lever Extensions | Summit Racing

Otherwise, stock four barrel linkage works as is.

And if you don't have the factory four barrel bracket, an AR bracket (forphorty's link above) works great.

 

[69FBCuda]

How to set up a Holley 4 bbl for a Mopar
How to set up a Holley 4 bbl for a Mopar

 

[340_duster]

Thank you guys so much. I have the 4 bbl throttle cable bracket, but I could not figure out the connection at the carb, but that Holley bracket makes it simple. Thank again.