ryan1964
Well-Known Member
I'm am looking for these parts to fit the stock manifold so when I take it to the exhaust shop I don't get hug up waiting for them any help would be appreciated
Exhaust 1964 Barracuda
- Thread starter ryan1964
- Start date
-
Professor Fate
Push the button, Max...
Most (well- many, anyway) exhaust shops flare the pipe themselves... I'd check with them first.
ryan1964
Well-Known Member
Ok thank you I was reading through another post on this forum and someone said they had to wait for the shop to order them so I figured I would ask thank you
Tried that. All of them near me have said that They can't do the Flare and the Bend required at least on the Passenger-Side.
Forced me to use my Stock (Teeny Weenie)DownPipes with Adapters to my new 2" Dual Exhaust...
Still Looking for the Solution. Who even makes these?
ryan1964
Well-Known Member
I'm fine using the small down pipes that's what I'm looking to see if someone sells that part incase the muffler shop can't do it I have the old ones the passenger side leaks a little bit
Professor Fate
Push the button, Max...
Yeah, that's why I said to check with them first- most "exhaust shops" are just parts replacers now, order in the pipes and slap 'em on; and you're limited to what's in the catalog. Hell, I can do that myself.
The trick is to find an actual Exhaust Shop, that can bend and tweak whatever size pipe you want for whatever application you have- and that includes the flares. Desoto Firedome in an Omni? No problem...
For prefab downpipes check Tti's site. Exhaust_Parts
ryan1964
Well-Known Member
My shop is really good he should be able too but just in case I'd like to be prepared. And you're right most shops just slap **** together now
jeff alder
Well-Known Member
Classic, Oregon ,Waldron and other's make 273 complete exhaust from manifold to tail pipe. If you need it for a slant 6 I have no idea.
ryan1964
Well-Known Member
Thank you
I bought a complete Waldron’s HiPo exhaust system to connect to my stock manifolds for my 65 Dart wagon. It has the flares on the Y pipe that fit perfectly to my manifolds. The system can be installed at home FWIW.
junkyardhero
Well-Known Member
i just installed TTI headpipes and midsection w/ H pipe on my 65 dart with 4spd and they fit *perfectly*
** you need to mod the trans x-member if doing true duals
*** with the 90* filter adapter, depending on what you've got cooking mounts wise and filter housing wise you may need some adjustment. i shaved the bolt down a bit and put a tiny dimple in the pipe.
** you need to mod the trans x-member if doing true duals
*** with the 90* filter adapter, depending on what you've got cooking mounts wise and filter housing wise you may need some adjustment. i shaved the bolt down a bit and put a tiny dimple in the pipe.
Walker is the manufacturer and the part numbers are in that pic of yours. But not sure if those fit factory manifolds. I used Walkers for Magnum manifolds.
-
