fattys on an early A wagon

[CUDAGUY]

Im looking at these...

http://www.summitracing.com/parts/CRR-61854/

with these.....

http://www.summitracing.com/parts/BFG-45982/

on the rear of this.....

http://www.facebook.com/home.php?ref=home#!/photo.php?pid=41902&id=100000084229198

and probly these....

http://www.summitracing.com/parts/CRR-08060/

and these....

http://www.summitracing.com/parts/BFG-66748/

on the front


any Ideas, or suggestions? I may just continue making steelis tho, but the sizes are the same

 

[OldVart]

I don't think you'll be able to fit an 8" wheel in the confined space of an early A body wheelwell. With the spriings moved inboard, and the wells mini tubbed you could fit them.

 

[Blownfish]

You can put a pretty good size tire on a wagon since the wheel wells have a big radius, but I would think twice about a 255 70, that's pretty tall, maybe a 255 60 would be better.

 

[bayyum]

i think we need pictures!!! 8)

 

[CUDAGUY]

I had a 255/70 mocked on the Cuda but didint have a wheel, I had finger room on either side, so the width doesent concern me but the height was questionable

 

[damraider]

These are 245 /60 /14 on my wagon .

 

[Keith Mopar]

you will fit a 17 X 9 on the back, but a 15 will have to much sidewall.
I have 17 X 9 on my 65 Cuda with 275's on it, very close but it makes it.
do lots of measuring to get the right back space. i think mine have a 5.92 back space, my springs are moved in but my wheel wells are stock.

 

[63VALIANT*KISS]

i got 8 1/2" wides on my 63 wagon slot mags

with a 74 dart custom lbp rear 81/4no moved springs or nothing