Fender well exhaust routing

[twayne24365]

My dart is down at the exhaust shop getting the exhaust put on, keeping frame connectors in mind there is not many options on routing the exhaust, I'm using 3.5-3" collector reducers into flow master super 10s. anyone with a big block a body with fender well headers mind showing how your exhaust is routed?

 

[MOrePowAR]

Made my own connections plates to 3 inch, no mufflers, used steel wool at the end of the pipe and capped it with baffle steel

 

[mguner]

 

[Daves69]

Mine was done years ago. Had the shop turn the exhaust back in to somewhat stock configuration as I wanted it to exit in the stock location.