Fighting exhaust leak

-
Slant Six Bumblebee

Slant Six Bumblebee

Well-Known Member
Joined
Dec 24, 2020
Messages
210
Reaction score
140
Location
vancouver wa
I am fighting a reoccurring exhaust leak between the bottom of my manifold and the flange on the Downpipe. I have tried remflex gaskets and have come to the conclusion that the flange is not flat how do I remove the flange from the pipe without cutting it?
 
Slant Six Bumblebee said:
I am fighting a reoccurring exhaust leak between the bottom of my manifold and the flange on the Downpipe. I have tried remflex gaskets and have come to the conclusion that the flange is not flat how do I remove the flange from the pipe without cutting it?
Click to expand...
Magic? You don't. The pipe must be cut OR taken apart somewhere so the flange can slide off.
 
Is it a flat welded flange with a gasket. Or is it a ball type. Either is an easy fix with the proper tools
 
Never seen the ball type on a /6 before.
Going by the fact that the question is in the /6 forum, and the screen name I think it's safe to "assume" that that's what he's working on.... Hahaha
 
You must log in or register to reply here.
-

Back
Top