dicksmidlac
Well-Known Member
Hi I finaly found my beltline trim and need to know where to drill the holes for the clips.Does anyone have measurements for hole spacing.Any help would be appreciated.Thanks
Hi I finaly found my beltline trim and need to know where to drill the holes for the clips.Does anyone have measurements for hole spacing.Any help would be appreciated.Thanks
Agree with Dragonsteel, the 3M tape is the way to go. I have used some on fender emblems and they are still holding on very well, 5 years later. You can get thin tape that won't raise the trim up at all.
View attachment 1715467335
View attachment 1715467336
My 74 Scamp had it I think. At least there's holes and drilled out rivets. About 2.5 inches apart on the ends and about 6 inches apart in between.Thanks that's what I was thinking.Now I just need to find someone that's got them off for measurements for hole spacing.
The measurements I need are for the trim that goes on top of doors and quarter,like in pics.But Thanks fo the replyMy 74 Scamp had it I think. At least there's holes and drilled out rivets. About 2.5 inches apart on the ends and about 6 inches apart in between.
View attachment 1715467600 View attachment 1715467601 View attachment 1715467602
I don't know much about this trim.Didnt even know it existed until I spotted it out in a pic and had to have it.Apparently pretty rare.Can somebody school me on this trim? Was it an option? My Duster is torn apart for resto right now and I don't remember if it was on my car or not. When I get my kids under control for the night, I'll go out to the shop and see if the doors have holes for the clips. Any info on this trim would be appreciated. Thanks
Now I thought he was talking about the trim that goes on top of door, not body side trim??My 74 Scamp had it I think. At least there's holes and drilled out rivets. About 2.5 inches apart on the ends and about 6 inches apart in between.
View attachment 1715467600 View attachment 1715467601 View attachment 1715467602
My bad. Hope I didn't confuse things to much.The measurements I need are for the trim that goes on top of doors and quarter,like in pics.But Thanks fo the reply
Does anyone no the name of the trim that is being talked about here.
I would like to find this trim