Frt sway bar brackets

-
B

Bennoel 10

FABO Gold Member
FABO Gold Member
Joined
Feb 15, 2022
Messages
962
Reaction score
883
Location
Toronto, Ontario
Looking for a pass side sway bar bracket that bolts up the k-frame on a 69 dart. I believe someone was reproducing the outer piece of this bracket. It was a repair piece as they tend to get damaged. I can't seem to find where I saw them or who was reproducing them. Pictures showing the damaged passenger side and the good driver's side. Any leads appreciated.
Thanks.

20240919_154411.jpg


20240919_154409.jpg


20240919_154436.jpg
 
You could remove the brkt from the frame, install a standard poly bush and brkt on the bar, then build an adapter brkt to go between.

Another option is you could bend two 1/2 inch wide and one one inch wide by 1/8 strips, lap the center strip over the sides slightly and weld them together (looks like a top hat from the end), then weld to the brkt. About $10 worth of steel from the home improvement store.
 
MV8 said:
You could remove the brkt from the frame, install a standard poly bush and brkt on the bar, then build an adapter brkt to go between.

Another option is you could bend two 1/2 inch wide and one one inch wide by 1/8 strips, lap the center strip over the sides slightly and weld them together (looks like a top hat from the end), then weld to the brkt. About $10 worth of steel from the home improvement store.
Click to expand...
Yes I think I might try something first and if not happy I can spend the $$$
 
You must log in or register to reply here.
-

Back
Top