74 360 dart sport
Well-Known Member
Hi everyone this was not hooked up when I bought the car does it get installed from outside like this or does it go in from the inside and does the rest look right thank you in advance
1974 dart sport 360year and model would help. If it's an inside mount (1970-???) then put the pipe into the tank while mounting the tank (with the trunk floor gasket on it!), then once the tank is secured, work the pipe up to the mounting face and insert the raised part in the hole and get the screw holes lined up which install from the outside threading into the filler neck flange. You can easily tell if it is an inside or outside flange because the outside filler tube flanges have holes bigger than the screws and the screws thread into the body metal, where inside mounts have body holes bigger than the screws and they thread into the filler tube flange.
Right now I am going to have it as a dead head really don't know how to add anything the tank has a nipple for a vapor line that had a steel line that ran to the charcoal canister and I believe up to the carb but this is a new tank with a aeromotive electric fuel pump externallyBefore you get this all nailed together make sure you have the right setup FOR A TANK VENT or have one at all. Now is the time to deal with it, and if there is ANY thought at all about vapor return for a carb, or pump regulator return, or maybe later on EFI now is the time to get the tank/ vent/ return set up