73Drtsport1
Well-Known Member
Hello FABO Members,
I need some advice on rebuilding 318 LA motor.
Want to keep the same motor in car.
This will be a performance motor that runs off pump gas.
I called one motor shop and he was talking $ 6500.00 and didn't get into
the details, just a general idea if the block was still good to use.
Will be getting the stroker kit 4.000, but don't know which one to get.
example : Forged crank/piston, Cast crank/piston, Cast crank/forged piston ?
Have not made my mind up about keeping the same heads and having them
worked on or going with Aluminum heads and intake, but want to start with bottom end of motor first.
Thanks
I need some advice on rebuilding 318 LA motor.
Want to keep the same motor in car.
This will be a performance motor that runs off pump gas.
I called one motor shop and he was talking $ 6500.00 and didn't get into
the details, just a general idea if the block was still good to use.
Will be getting the stroker kit 4.000, but don't know which one to get.
example : Forged crank/piston, Cast crank/piston, Cast crank/forged piston ?
Have not made my mind up about keeping the same heads and having them
worked on or going with Aluminum heads and intake, but want to start with bottom end of motor first.
Thanks