Trying to get into the 11s with my 74 dart. Build list is below. Had it on the dyno without spray last month having carb issues ( ran super rich on top end not responding to jet changes ) and it only put 350 to the wheel, few pulls later it spun a rod bearing. Engine is back together and I'm hoping that number will climb later this week with a new carb before the spray goes on. Do you think my build can hit 11s or where am I lacking. Running at Colorado altitude.
408 stroker magnum block
Eq heads 1.92 and 1.60
10.5 to 1
Forged Pistons, rods and crank
Air gap manifold
800cfm Holley double pumper
Full length headers and 2.5" back
3.91 rear end
3speed a230 trans
26x8.5 slicks
Aeromotive street strip electric fuel system with return to sumped tank
Dedicated 1 g fuel cell and pump for plated nitrous system ( planning on 150-200 shot )
Don't have cam specs handy but it's a Howard's hydraulic roller not too aggressive.
408 stroker magnum block
Eq heads 1.92 and 1.60
10.5 to 1
Forged Pistons, rods and crank
Air gap manifold
800cfm Holley double pumper
Full length headers and 2.5" back
3.91 rear end
3speed a230 trans
26x8.5 slicks
Aeromotive street strip electric fuel system with return to sumped tank
Dedicated 1 g fuel cell and pump for plated nitrous system ( planning on 150-200 shot )
Don't have cam specs handy but it's a Howard's hydraulic roller not too aggressive.