powerwagonpaul
Well-Known Member
i have seen marks car first hand, it is truely BADASS!! i would love to see it on pass time, it would fool everyone! mark, have you ever had it on a dyno?
thats impressive:cheers:Nope,but by doing alot of different calculations with my et,mph and weight I am pretty sure its real close to 275 rwhp.Guzzi Mark
Guzzi Mark said: "DO NOT TRY TO DEAL WITH THOSE ROCKERS!!!!.Will explain when I have more time tonight."
????????????????????????????????????????????????????????????????????????????
I only have .484" total lift at the valve with 1.5 ratio rocker arms
I REALLY need a set of 1.6 arms. What is the problem, please, with the ones you have, and what would you suggest I do???
Thanks for any advice/info...
PS What is your engine's redline (shift point)???
you using stock rockers?? there only 1.4...
Really. What a bunch of conartists!:angry7: Thanks for telling us this before some of us ordered from there.8)Stop bustin his balls? I would FLY to his place if it was my money just to take it out of his ***. What a bunch of pricks.
I have a borrowed set of RAS rockers that were made several years go.Ordered a set over a year ago in a group buy.After 8 months of missed promises I finall got them only to find out the shafts were half as thick as my borrowed set and when torqued down they would bind.Brought the rockers to Samoa in August to show the new owner Trent and he agreed there was a problem.There was no binding problem when I tried them with my thicker shaft,but they had changed the design so that my push rods wouldnt work.Trent took my paid for rockers and said he would figure it out.Waited 3 months and started calling,12 messages were left and no return call.Finally he picked up the phone and I asked him what was up?He had sold my rockers but said he would make some more and it would be a couple weeks,and said he would call in a couple days to confirm he could get the materials.NO call.I waited 3 weeks and started calling every day leaving messages to please just call.24 messages later I finally talked to Matt and told him I just wanted a refund,said check would go out that day.waited a week ,no check,started calling again.Left anouther 7 messages till I finally got Matt again.He told me to quit busting his balls he would get a check out that day???Tues it will be anouther week.I just want my money back.Trent the owner has never returned a call since he got my money and my rockers despite over 30 calls to his shop and 10 to his cell phone.DONT plan your build around there rockers like I did.They are now called Rockerarms.com
bill, did you check the dimentions on the rockers that were on that head you got from me? i thought they were the clifford 1.6 rockers.
My Roller Roackers came from Cox brothers.....they may still have a set or 2, I would check!!
They still have "stuff", Its been maybe a year and a half since I have talked to them at all, but I can get a contact number if someone REALLY want to contact them.
Bill and Mark. Check with T&D for slant six roller rockers. I have never used them, but I know they have them available, as special order. Not cheap, though. I don't remember for sure, but I think the Cox Bros. rockers were made by T&D.
http://www.tdmach.com/
Correct, they are not in the catalog. I talked to them last year at the PRI show, and they told me they have made them, and could do more. They are not a "stocking" item, however.Thanks, Charlie. Those rockers are not in the online catalog, but I'll call them tomorrow and ask about the availability of them.
'preciate the info!!!8)
I know they won't be cheap...:angry7:
I just looked over at dot org and found this.
http://www.slantsix.org/forum/viewt...ostorder=asc&highlight=roller+rockers&start=0
Cox rocker arms were RAS, not T&D