GermzD74
Cool Member
Hello guys, need a few tips on porting my EQ magnum heads.
I've all ready started shaping the valve guides round. Looking at the following picture...I'm not sure how to shape the marked area into a smooth sharp edge. I tried using the long shank carbide bit that I used to shape the guides but they tend to bounce around too much. For those that have done this, what tools can I use to accomplish this?
I looked for grinding stones, but couldn't find any long shank ones (6").
I want to be able to shape the marked area tapered with a close to sharp edge at the top so that it flows with the least restriction and to smooth out the roughness the carbide bit left.
The second picture is of a head I found online, looks similar to mine, I want it to come out similar to that.
Thanks
I've all ready started shaping the valve guides round. Looking at the following picture...I'm not sure how to shape the marked area into a smooth sharp edge. I tried using the long shank carbide bit that I used to shape the guides but they tend to bounce around too much. For those that have done this, what tools can I use to accomplish this?
I looked for grinding stones, but couldn't find any long shank ones (6").
I want to be able to shape the marked area tapered with a close to sharp edge at the top so that it flows with the least restriction and to smooth out the roughness the carbide bit left.
The second picture is of a head I found online, looks similar to mine, I want it to come out similar to that.
Thanks