Headers with power steering

-
496 polara

496 polara

moparts id gch
FABO Gold Member
Joined
Feb 23, 2014
Messages
3,191
Reaction score
13,974
Location
North Carolina
What headers work with power steering? 72 Duster with a 440. TTi says no power steering with their BB headers. Has Tri-Y now and was hoping to go bigger when I do heads and cam.
 
I would be interested to see about the TTI headers and the small Borgenson box.
 
Proparts work with PS. Hard to see but there was no interference at all.

proparts2.jpg
 
Proparts are semi fenderwell. Two tubes on drivers side and one tube on passenger side exit the femderwells.

propartsBOB.jpg
 
How do you put those ProParts headers in if some tubes go around the frame and some dont?
Do they come in pieces and you have to weld them together?
 
rr4406pak said:
How do you put those ProParts headers in if some tubes go around the frame and some dont?
Do they come in pieces and you have to weld them together?
Click to expand...
they're slip fit at the collector. the tubes that go around the frame are separate.

the set i did had tabs for exhaust springs on the pipe and collector to hold them tight.

i'm not sure but i believe that they're made by TTI
 
Here are the tubes off the car. I think you can see where they separate.

proparts2.jpg
 
That seems like the ticket for me if I can find a set. Any tire clearance issue with the fenderwell tubes?
 
496 polara said:
That seems like the ticket for me if I can find a set. Any tire clearance issue with the fenderwell tubes?
Click to expand...
the car that i installed them on was pretty standard with 15" americans and probably 215's or maybe 225's and there didn't seem to be any clearance issues so i can't really speak to anything much more exotic than that. so i'd hazard a guess that if you kept it reasonable you should be okay.
 
26/27 inch tall tire is about the limit using pro-part headers

IMG-20120107-00134.jpg


IMG_20170709_120008.jpg
 
You must log in or register to reply here.
-

Back
Top