It MAY but you will have to drill additional holes in the firewall and you will have to use everything from the car except the switch. The 67-73 cars used a 5 button vacume switch and the later ones used a slider switch to control the a/c and heat. The actual heater box with the heater core was the same for many years and the a/c cars had a bolt on seperate box that bolted to the heater box for support via a bracket. The best thing to do is lay it all out and compare. The 67-9 cuda also uses it's own dash bezel so the switch will have to fit in the existing location. It will be a lot of work