help heater control removal

[twisted318]

hello I have a 72 duster that I had parked for a little while I just started it up a couple days ago and my blower motor no longer works. I was going to remove the heater controls and see if the contacts where all corroded. the thing is I don't know how to remove the heater control panel any help please. or possible any other suggestions of what it could be.

thanks

 

[70dustah]

I would check for power at the blower motor first, more than likely it seized up from sitting. Much easier than pulling control assembly. Don't forget to check fuses first.

 

[RedFish]

The push button a/c controllers are trouble makers ( you didn't say w/wo a/c ).
Anyway.. Removing the glove box is probably your best route.

 

[BillGrissom]

You probably also have a L-M-H blower switch next to the push-button control (or whatever you have). That switch often melts. While in there, consider adding a 40 A relay for the "blower high" position so a new switch doesn't melt.