[WANTED] Holley 4160

[65dartcharger]

I'm looking for a decent Holley 4160 in good condition for a 273.

Thanks FABO!

 

[coloradohill]

What cfm are you looking for?

 

[65dartcharger]

What cfm are you looking for?

What size were they, 500 or 600?

 

[coloradohill]

What size were they, 500 or 600?

I’m not sure what the stock carbs were.
I have a 670 and 750 that I am not using.

 

[Garrett Ellison]

I'm guessing list number 1850 600 cfm would probably suit your purposes well, although there are some smaller variants available (such as 465cfm), too.

 

[65dartcharger]

I'm guessing list number 1850 600 cfm would probably suit your purposes well, although there are some smaller variants available (such as 465cfm), too.

Not sure what cfm Holley had for the 273 in 1965. Did they had a 500 too?

 

[Garrett Ellison]

@toolmanmike Please Verify... I'm not aware of the four barrel 273 using anything other than an AFB, and I'm finding the rating is somewhere in the 535 CFM range.

 

[toolmanmike]

@toolmanmike Please Verify... I'm not aware of the four barrel 273 using anything other than an AFB, and I'm finding the rating is somewhere in the 535 CFM range.

Correct

 

[jeff alder]

@toolmanmike Please Verify... I'm not aware of the four barrel 273 using anything other than an AFB, and I'm finding the rating is somewhere in the 535 CFM range.

The 275 horse 273's allegedly had Holley carbs not the well known Carter.

 

[burks440]

i have 2 600 holleys .these are late model carbs and clean to.

 

[jeff alder]

https://www.motortrend.com/features/dodge-d-dart-273-december-1980-982-1244-77-1/ the D/stock 273 with Holley on top. I couldn't find anything on the CFM but the pic is good enough for where things are located in this pic set on a mopar engine.

 

[toolmanmike]

Let's keep this a Wanted thread and not a information thread on what carbs were used. If you have a carb for Ulf send him a PM.

 

[grampscamp]

Ive got this original Carter 3854S. Can send more pics if interested.