Holley Street Dominator for small block!!! and Hardin Marine carb adapter / spacer!!!

-
Status
Not open for further replies.
moparmanSD

moparmanSD

A body Mopar man...
Joined
Feb 18, 2009
Messages
51
Reaction score
0
Location
San Diego CA
Rating - 0%
0   0   0
Contact seller
I am in Oceanside CA 92056 with these parts at my home for anyone local to San Diego or Orange County California, even people from Los Angeles please feel free to stop by to pick this up in person. For the rest of you I will do my best to give you shipped prices on my parts.

I ship via FedEx on the same day I am paid and I also will PM or email you the tracking number of the package with the parts on the same day you pay me as well. I have always been able to ship my parts out the same day because there is a 24hour FedEx here in Oceanside.

As for payment I do have paypal and there is a 4.9% fee that paypal adds on.

The price listed is the picked up price... for a shipped price let me know your City, State, and Zip Code... and I will give you a shipped quote.

The Admin team says not to put my email addy so please PM me and post any and all questions in this thread... I will do my best to answer anything you ask.

Now for the parts:

1. Holley Street Dominator 300-7 Aluminum low rise single plane intake manifold. This is no longer made by Holley so they are a little hard to come by. This is perfect for any small block mopar motor; 273 / 318 / 340 / 360 When you put this puppy on a small block Mopar with a 600cfm carb like I have listed above the power you can pull out of that motor is too much fun. Just add a mild cam and headers and have a blast. I am Asking $120.

This is used and fresh off my LA2 318 mopar small block. I didn't have a chance to clean it up before the pix but I will clean it up in the next few days.

There are some numbers besides the part number on it on the underside. The part number is 300-7 the other numbers are; 701R-7, CM-LS, 02217

HolleyStreetDom2.jpg



More Pix:
http://i362.photobucket.com/albums/.../Holley Street Dominator/HolleyStreetDom5.jpg
http://i362.photobucket.com/albums/.../Holley Street Dominator/HolleyStreetDom3.jpg
http://i362.photobucket.com/albums/.../Holley Street Dominator/HolleyStreetDom4.jpg
http://i362.photobucket.com/albums/.../Holley Street Dominator/HolleyStreetDom6.jpg
http://i362.photobucket.com/albums/.../Holley Street Dominator/HolleyStreetDom1.jpg
http://i362.photobucket.com/albums/.../Holley Street Dominator/HolleyStreetDom7.jpg


2. Hardin Marine carb adapter. Part number 620-2066 This is a Carburetor spacer and adapter that is made of Aluminum and it is 0.75 inches thick. This is for square bore to spread bore. This is a used part. New they list for $30 I am asking $15.

"This aluminum carburetor adapter allows an inexpensive method to mount a performance style square bore carburetor to an original equipment spread bore style intake manifold. Gaskets sold separately." --- http://www.keitheickert.com/detail.aspx?ID=894

Alum75inspacer1.jpg


More Pix:
http://i362.photobucket.com/albums/...arine point 75in spacer 620-2066/DSCF0006.jpg
http://i362.photobucket.com/albums/...arine point 75in spacer 620-2066/DSCF0005.jpg
http://i362.photobucket.com/albums/...oint 75in spacer 620-2066/Alum75inspacer2.jpg

Please PM or post up and I will be here to help you out.
 
PMs replied to... A lot of questions but no one wants this intake? I have read many threads with people looking for this one...
 
I can not edit this... can a mod or admin help me out?

The Holley street dominator aluminum intake manifold for small block Mopars had been SOLD... I sold it this am to another A bodies only member... and I am shipping it this afternoon... can it be taken off my for sale thread please?

The Hardin Carb spacer / adapter is still for sale and needs to stay...

thank you for any help Mod or Admin
 
EL5DEMON340 said:
pm sent on spacer
Click to expand...

^ Do not do any business with Mike ... this guy above.. called...EL5DEMON340


He made a deal for the spacer and I sent my paypal and he took 4 days and never sent payment... Mike or EL5DEMON340 is not a good buyer at all.... I would never trust him since he told me we had a deal and he broke it Mike or EL5DEMON340 is NOT a man of his word at all. I will never deal with this guy again.

The spacer is still for sale but not to liars like Mike or EL5DEMON340... He has bad communication skills and lies and never sent payment when he said he did... check his iTrader under his profile. Admin has been PM'd about this matter with Mike being a bad buyer...



The spacer is still for sale.
 
Im at work now typing from phone, i will post the pm's later on this matter. Check your dates you first contacted me sunday at 10 pm for starters. Would like mods to watch this please
 
MOD watching.

Words of wisdom and selling ways of myself.

Moparman SD, things do not allways go smoothly or quickly for many reasons. The bottom line is, cash is king and when you get it, then it is sold and all deals until then or just words trying to make a deal. Of for which you accept or not.

My rule(s) is;

The first person to pay gets the part.

I may reserve a part for you as per the promised deal of you paying by a certain time. After the time has elapsed, the floor is open to the first come, first served.

Any part not fully paid for will get a reasonable wait time for full payment to arrive. An amount of time aggred by both parties.

Part(s) will not leave the house/garage until full payment is made and turned into cash in my hand so I can ship the part.

This way, any funny biz buy crap people trying to screw me out of a part can not get there part because it is there money shipping the part.

Some deals I have made have taken a month to complete. Since this is not a biz for me, I can wait, there only taking up room and collecting dust.

My point of veiw;

At this point, your wait of a few days is normal and trashing the possible purchaser of the part is bad charter on your behalf and trashing his rep needlessly. In this case, El5demon340, has been here a long time and has been labeled poorly and with haste. I rebuke this with a backing of my word and being here for a long time knowing this screen name and his dealing for a long time now as allways being a good fella.

If this deal falls through, I'd lay blame in the mirror and not him.

Now, relax and speak words on goiing forth on the deal, or cancel the whole thing.
 
So we get out panties in a bunch over three days?

Heck, this is just a hobby to most of us trying to make a living. Most people have a lot of commitments right now, with Christmas just 10 days away.
 
Right, and being a at home dad days then going to work at 3 pm to midnight, and taking care of a sick child for the last week, this guy wants to know why when i offered him $20 shipped and he refursed and wanted more $ the dance for me was over
 
HemiEd said:
Heck, this is just a hobby to most of us trying to make a living. Most people have a lot of commitments right now, with Christmas just 10 days away.
Click to expand...
Oh jeezz, thanks for the reminder. Time is running short!

EL5DEMON340 said:
Right, and being a at home dad days then going to work at 3 pm to midnight, and taking care of a sick child for the last week, this guy wants to know why when i offered him $20 shipped and he refursed and wanted more $ the dance for me was over
Click to expand...

OH buddy! You are singing my song like no tomorrow. Ditto minus hours worked. I'm a 12:30am to 8:30 am guy with an additinal shift or 2 a week to make ends meet. The shifts connect so the day goes to 16 hours. Then, theres the 1 hour comute time WHEN the train arrives a scant 35 minutes after the shift ends.
 
Well where do i start with this member of 66 posts, Keep in mind he replied to my first pm Sunday night and by Wednesday afternoon gave me a negative reveiw 2 1/2 days total time.
First off in my first pm at 4:30 Sunday afternoon i said "I'll take it if you can do $20 shipped to 60502" as a gift no less so he wouldn't pay fee's, note nowhere did i ask for a shipping quote. Then you pm'ed me back at 9:30 pm wanting $22, At that point the offer is off the table, just like at a swap meet, pawn shop, or auction, i simply walked away and forgot about it,
Next he evidently sends a pm about a 1/2 hour later saying i can go ship it tonight but don't have payment yet. i cant remember if i opened this that night or the next day, but anyway i don't know if hes waiting for me to cough up the $22 or get a quote late night from fedex. This PM to me is a mute point, i offered $20 for it and did not want shipping quotes on a $15 dollar part.
Next i never replied saying i sent payment/ or i will send payment, after your initial rejection of the $20 i was done. Do you have ANY PM's with me saying "Great its a deal heres my address" i will send payment for $22 or $20? Please post if you do!!
next i see there is a PM sent tuesday night at 11:30pm stating you will now want to take the $20 offer, I open this pm around lunchtime Wednesday and respond by politely saying "the $2 dollars was not a big deal, but i'll pass it off to the next in line"
since you didn't agree to my offer which is your right by the way until 48 hours later, I SIMPLY AND QUITE HONESTLY LOST INTEREST AND MOVED ON TO THE NEXT PURCHASE!

Since there was no deal agreed on in a timely fashion and clearly i never paid for any part and did respond to his pm when he did finally agree to my $20 offer with a clear decline of buying the item. I feel the negative mark on my account should be removed, also this rating system should be for for actual transactions that have gone bad and not should have, would have, maybe, i don't like your price/i don't like your offer etc..
Also this young man has 66 post, this feedback system should be for members with more of a vested interest in FABO maybe only members with 250/500 post count should use it.

Thanks and looking forward to working with the MODS to resolve this
Thanks Mike
 
My first PM at 4:30 and his first reply at $9:30pm

Quote:
Originally Posted by EL5DEMON340
Hi, if you could go $20 shipped to 60502 Aurora, IL i'll take it, Do you have paypal? if so i can send $$ as gift so you don't get hit with fee. Thanks Mike
Hey Mike,

I dont think it will fit in a flat rate box but I can try... a flate rate box is $7 I can ship it out Monday at USPS to you for $22 shipped if you use paypal as a gift... hows that?

my paypal addy is:


Let me know when you have made payment so I can edit my thread

__________________
For Sale Hardin Carb spacer / adapter made of aluminum for Mopars... used on my small block 318 with a Holley street dominator...

http://www.forabodiesonly.com/mopar/...015#post950015
 
heres his second PM about 10pm, I'm not sure if i seen this that night or Tuesday

.Quote:
Originally Posted by EL5DEMON340
Hi, if you could go $20 shipped to 60502 Aurora, IL i'll take it, Do you have paypal? if so i can send $$ as gift so you don't get hit with fee. Thanks Mike
I could see if I could get it in the mail at fedex tonight as well... but I dont have payment yet... I just shipped the intake at fedex a few hours ago... I can get a quote from them if you dont want to wait till monday for me to ship USPS....

__________________
For Sale Hardin Carb spacer / adapter made of aluminum for Mopars... used on my small block 318 with a Holley street dominator...

http://www.forabodiesonly.com/mopar/...015#post9500
 
heres his pm 11:30pm Tuesday night


Quote:
Originally Posted by EL5DEMON340
Hi, if you could go $20 shipped to 60502 Aurora, IL i'll take it, Do you have paypal? if so i can send $$ as gift so you don't get hit with fee. Thanks Mike
hey Mike I have not heard back from you.. was 2 bucks really a big deal breaker? if you want it send me 20 and I will ship it...



__________________
For Sale Hardin Carb spacer / adapter made of aluminum for Mopars... used on my small block 318 with a Holley street dominator...
 
AND HERE IS HIS THREAT TO BUY IT OR ELSE... LOL this was wednesday afternoon i posted my response about noon then about 3pm on my way to work he threatens me, and 20 min later full of rage Junior dings my review.

Quote:
Originally Posted by EL5DEMON340
Quote:
Originally Posted by moparmanSD
Quote:
Originally Posted by EL5DEMON340
Hi, if you could go $20 shipped to 60502 Aurora, IL i'll take it, Do you have paypal? if so i can send $$ as gift so you don't get hit with fee. Thanks Mike
hey Mike I have not heard back from you.. was 2 bucks really a big deal breaker? if you want it send me 20 and I will ship it...


No not a big deal, But i'll pass it off to the next in line.
Thanks..
What does this mean? so far you made a deal and now you are trying to break it? so I should make a post on how you are not a man of your word and that you can not be trusted? Is this what your saying to me? You made a deal... simple the deal is done and so far you have no upheld your end.... this is your last chance to be a man of your word...

__________________
 
Ok - here is what I think.

moparmanSD, I think you were a bit unreasonable here. You jumped the gun here and pushed this a bit too far. If EL5DEMON340 didnt ultimately want the part so what? Its not like you shipped it and he didnt pay. Its not like this was some long and drawn out process.

EL5DEMON340, it does look at one point like you agreed to buy and then backed out. OK, that happens. But maybe be more certain i the future.

I deleted both iTraders. This is ultimately a misunderstanding and overraction I believe. Lets just move on folks. In the end, no harm no foul.


...
 
Mike needs his NEG iTrader back... He earned it. He made a deal and broke it... no matter is he is your buddy or not rules are rules.. he made a deal .. and never paid.. this is complete bullshit... MODS fix this NOW.
 
Hey rumblefish360 why dont you delete the bullshit posts in my forsale thread... and if they want to talk this out we will move it to the correct section... clean the thread.. do not delete my forsale thread... I have been a member here for a long time and have helped alot of other good FABO members out and now your turning you back on me?
 
I addressed this in your wild PM to me. Turning my back on you? WTF is that statement all about?
Not getting your way?

I'm going to work now.

Goodnight!
 
rumblefish360 said:
I addressed this in your wild PM to me. Turning my back on you? WTF is that statement all about?
Not getting your way?

I'm going to work now.

Goodnight!
Click to expand...


No you did not... this post and the other posts in my FORSALE thread need to be deleted.... they are not on topic...


The entire point is a deal was made and then broken.. so Mike is NOT a man of his word at all....
 
Status
Not open for further replies.
-

Back
Top