"Dart67"
Well-Known Member
This is my latest project on "Home-Brewed"
I fabricated these Big Block Sparkplug Wire Separators from 1/8" x 3/4" black iron flat stock.
I found the Red Wire Separators on E-Bay.
The Wire Separators and brackets are drilled and the brackets tapped with a 4-40 tap.
I used Stainless Hex button head machine screws to attach the Wire Separators to the brackets.
Herb
I fabricated these Big Block Sparkplug Wire Separators from 1/8" x 3/4" black iron flat stock.
I found the Red Wire Separators on E-Bay.
The Wire Separators and brackets are drilled and the brackets tapped with a 4-40 tap.
I used Stainless Hex button head machine screws to attach the Wire Separators to the brackets.
Herb
