Yote
Well-Known Member
Yote submitted a new Article:
HOW TO -- Glove box latch removal
Read more about this article here...
HOW TO -- Glove box latch removal
This was on my '72 Demon's keyless latch. I don't know if it's the same as the keyed latch.
1.-- Remove the two screws holding the latch in place for better access.
2.-- Push the catch so it is held in the closed position.
3.-- Find the small slot in the bottom of assembly toward the door.
4.-- With a wire ( I was able to use a small pick) depress and hold the small spring loaded
tab.
5.-- The knob should now pull off the front of the door ( holding light pressure to the catch
toward the closed position may help).
6.-- To ease reassembly a small wire may be inserted in the hole in knob while holding the
tab depressed. This will keep the tab in place.
7.-- Slide the two pieces together in proper alignment untill the tab is in position and remove
the wire.
8-- Replace the two screws holding latch assembly and your done.
View attachment 1715092198
View attachment 1715092199
View attachment 1715092200
View attachment 1715092203
Read more about this article here...
Last edited by a moderator: