Hows my 360 run?

[Ori]

Hey guys! Got back from the track and was wondering what your opinions are on my magnum 360 and quarter mile times. Here's the build-
Magnum 360 with forged pistons and 9.5 comp.
Rhs heads(stainless 2.02/1.6)
Custom forced induction cam, 236/234, .525 lift
Off brand airgap intake with a 600cfm eddy, firecore wires
904 low gear with 3500 stall and 3.91 gears, 275/50/15 mt et street tires for the back.
Car with me weights 3505lb.
Now for the times- everytime I ran(3 times), I got a 14.00@95mph, 1.93 60ft time. ALSO keep in mind I was at a track of 5500ft and it was 90degrees. I checked the D/A and it was 9200...eek!
Now time for some feedback

 

[70aarcuda]

14 flat with a DA of 9200.....now bad....anything to improve the 60 ft help the overall ET...

if you could borrow a good 750 Holley dp....you will probably seen an improvement

 

[cuda20]

I'd say that's pretty damn good. I agree 70arrcuda about the 750 dp. That 600 is a little small for a 360. Probably notice a big difference at the top end.

 

[rickstershemi]

Not bad.......I believe at sea level that should convert to 12/teens @ 110 - 112 mph......a 750dp properly tuned should drop you into the 11's easy :glasses7:

Rickster

 

[RustyRatRod]

Not bad, but it needs more carburetor.