Hughes Rockers

[EXcappa]

Hey All,

I have these Rockers on my 416
Hughes Engines

I have emailed Hughes but I thought I would try here and see if anyone has first hand experience with decent pressure.
We will be using a Crane 4381 lobe, 680lbs open pressure. Will they hold up?

 

[famous bob]

Hey All,

I have these Rockers on my 416
Hughes Engines

I have emailed Hughes but I thought I would try here and see if anyone has first hand experience with decent pressure.
We will be using a Crane 4381 lobe, 680lbs open pressure. Will they hold up?

did u get the cryo`d rockers ?

 

[justinp61]

What diameter are your springs?

 

[EXcappa]

What diameter are your springs?

Not sure on that

 

[EXcappa]

did u get the cryo`d rockers ?

No they are not.
I received a reply from Hughes stating they would be fine, they reckon the rockers are guaranteed not to break.

 

[justinp61]

Not sure on that

I'd check, the description states that the rockers will work with a 1.5" diameter spring. Anything larger will require some work on the rockers that may void the warranty.

 

[B3RE]

I'd check, the description states that the rockers will work with a 1.5" diameter spring. Anything larger will require some work on the rockers that may void the warranty.

 

[justinp61]

Been there, done that.

 

[rumblefish360]

What are we trying to say?

(You can cheat by leaving links ;) )