I need one of these blocks

-
That is the reason why imports will never get any respect.....
 
Man, I feel sorry for that kid. That kit is a b*tch to put in. He'll have a fun time matching his muffler bearings with his catalytic inverter spool.
 
It's not quite as bad, though, if he uses a slipslider type Kanutsen Valve in front of his Catalytic Inverter Spool.
 
Talk about living in your own world !!!!
That guy must talk to his self all day long. :wav:

300mph :wack:
 
What is your take on that 9/16's or 5/8's end wrench, I'm wondering jst what kind of tool he really is.
 
I actually think that his wiggling pin is really loose in the wobbling hole! If he can get that adjusted properly ! Well he may be alright! LOL The problem is getting it adjusted properly,If you get it too tight you still have the same effect as you actually had when it was too loose! :salute:
 
memike said:
Talk about living in your own world !!!!
That guy must talk to his self all day long. :wav:

300mph :wack:
Click to expand...
One too many hits n the crack pipe :butthead:
 
You must log in or register to reply here.
-

Back
Top