[SOLD] Indy 440 -1 heads w/ Jesel 1.7 rockers

[Jeremiah (jd)]

$2500 for everything in the pics. I was going to replace the valves and k liners but these could be run as is. Pressure tested w/ indicators and decks checked good at the local machine shop. These are older heads that have some miles but you won't get into a set of ported -1's and Jesel rocker arms any cheaper from what I have seen. Very nice porting work. All intake and exhaust bolt holes are helicoiled.

Moving to a 13 degree head otherwise I would be stabbing some guide liners and Ti intakes in to turn my 511" 8000+ rpm. Looking for 8500+ rpm so these must go.

Any questions please feel free to PM me here on the board.

 

[Moparpuller]

$2500 for everything in the pics. I was going to replace the valves and k liners but these could be run as is. Pressure tested w/ indicators and decks checked good at the local machine shop. These are older heads that have some miles but you won't get into a set of ported -1's and Jesel rocker arms any cheaper from what I have seen. Very nice porting work. All intake and exhaust bolt holes are helicoiled.

Moving to a 13 degree head otherwise I would be stabbing some guide liners and Ti intakes in to turn my 511" 8000+ rpm. Looking for 8500+ rpm so these must go.

Any questions please feel free to PM me here on the board.

View attachment 1715879086

View attachment 1715879087

View attachment 1715879088

View attachment 1715879089

View attachment 1715879090

View attachment 1715879091

View attachment 1715879094

View attachment 1715879098

View attachment 1715879099

View attachment 1715879100

Do you have flow numbers and would you ship? Thanks grant

 

[Jeremiah (jd)]

Do you have flow numbers and would you ship? Thanks grant

Yes on shipping, no on flow numbers.

 

[kravits]

Are you going to indy show this week?

 

[Jeremiah (jd)]

I moved to Oregon from Wisconsin in 2008. Not going to make it this year lol.

 

[Deweywinger&howe]

What are the springs rated at
( no addresses in public forums)