[SOLD] Indy 440-2 Intake

[MidTexCuda]

Going to a low deck so this ones day is done.
This unit is NOT ported but iI did clean up the big casting mark and gasket matched the unit.
I also had to do some grinding on the bottom to get the unit to sit low enough to mate to my low intake port heads and clear my custom valley pan. I did paint the unit but It can be removed easy.
Cost 250.00 plus the ride.
Pm if interested.

 

[MidTexCuda]

ttt
I WILL GET THE SHIPPING TO THE LOWER 48

 

[MidTexCuda]

Come on friends in need this thing gone. Send me a reasonable offer.

 

[srixon4406]

If this was for a low deck id be all over it

 

[1969Fish]

Will this intake work with edelbrock performer heads or does it only work with Indy heads?

 

[MidTexCuda]

If it was for a low deck I would be keeping it for my low deck build.
It is for a max wedge head, It would create a huge turbulence on a head with smaller ports.

 

[MidTexCuda]

ttt

 

[MidTexCuda]

blow out price of 200.00 + shipping
the runners are 2.566 x 1.337
I have gotten a couple of questions about the grinding I did on the bottom. All I did was shave down the four small pads that interfered with my valley pan because my heads have a low port window. The flanges have not been touched and the manifold function has not been altered.