Inner drop panel for right rear

[TNCUDA]

Hi all.

Working on my 1965 Barracuda formula s, very soon. Tring to get some of the weird parts before I start. Any you gurus know if the inner drop panel on the right side is available? The left was done by previous owner. I just need to know if I can get one, or am I going to have to fab on. Thanks in advance

I now know it is called the trunk floor extension


Perry

 

[Syleng1]

Better include a photo as an early Abody owner and Mopar guy for over 40 years- “inner drop panel” does not ring a bell.

 

[JDMopar]

I think you might mean trunk floor extensions. If you decide to buy from the company in the link, please contact FABO member @Rick@Laysons to get the scoop on whether what you need is in stock.
LAYSON'S RESTORATIONS - DODGE, CHRYSLER, PLYMOUTH RESTORATION PARTS

 

[TNCUDA]

Better include a photo as an early Abody owner and Mopar guy for over 40 years- “inner drop panel” does not ring a bell.

Got a picture this morning. It is the trunk extension

 

[1MeanA]

Check with AMD

 

[TNCUDA]

Check with AMD

Every Model but 64,65,66,67

 

[mopowers]

Check with @Lee Robinson. He's got a lot of solid sheet metal for early A's.

 

[toolmanmike]

Hi all.

Working on my 1965 Barracuda formula s, very soon. Tring to get some of the weird parts before I start. Any you gurus know if the inner drop panel on the right side is available? The left was done by previous owner. I just need to know if I can get one, or am I going to have to fab on. Thanks in advance

I now know it is called the trunk floor extension


Perry

View attachment 1716013495

No one repops them. As mentioned, Lee Robinson may be able to help. I got mine from Desert Valley Auto Parts. Just make sure you get ones specific to your car. They are pretty year and model specific.

 

[Syleng1]

Got a picture this morning. It is the trunk extension

View attachment 1716013494

Aaaahhhh! Yes that makes more sense now.
On my 66’ I had to use the drops from a 67-76 and trim to make fit. Since both sides are the same…. Nobody notices the difference. At that time nobody made a drop for the 66’

 

[toolmanmike]

Aaaahhhh! Yes that makes more sense now.
On my 66’ I had to use the drops from a 67-76 and trim to make fit. Since both sides are the same…. Nobody notices the difference. At that time nobody made a drop for the 66’

You Barracuda guys are lucky. My 66 Dart drops were completely different than the 67 and newer ones. I even have a pair from the 61 and 2 cars and no dice.

 

[Lee Robinson]

You Barracuda guys are lucky. My 66 Dart drops were completely different than the 67 and newer ones. I even have a pair from the 61 and 2 cars and no dice.

I don't have any, and Dart and Valiant/Barracuda are different.