Intake manifold info and AC bracket

[j_anderson]

I am putting the finishing touches on my assembled powertrain ahead of re-installation.
The intake manifold is (I’m told) from a 360. It has part number 4323352 in the casting.

I went to put the AC pump back on but I am missing the bracket on the drivers side. It’s triangular shape. It connects to two lower bolts on the AC pump (circled in red) and one bolt in the intake manifold (circled in yellow). On my original 2-barrel intake, there is about an inch raised boss (instead of a what looks like a capped hole) where this triangular shaped bracket attached.

1. Can anyone give me info on the manifold?
2. Does anyone have the correct AC bracket for an RV2 pump and this intake manifold?

As always, thanks for your help

 

[lemondana]

Yes, they never used the RV2 pump with the late-yours-manifold. That was when they started using the rotary compressor C171 I think?

 

[oldkimmer]

Trucks had the rv2 in 1981. I changed my truck to the aluminum Sanden style. Kim

 

[townsend]

Your manifold was used on 360 dodge trucks from 1985 thru 1988. No RV2 in those years.

 

[Ironracer]

Maybe I'm mistaken, but if the holes are there, couldn't you use some spacers and longer bolts?

 

[j_anderson]

Maybe I'm mistaken, but if the holes are there, couldn't you use some spacers and longer bolts?

This is what I planned to do if there wasn't an actual correct bracket for the application. I'm the end, I'm still missing my original bracket. So, I'll need to get a want ad going

 

[oldkimmer]

I am putting the finishing touches on my assembled powertrain ahead of re-installation.
The intake manifold is (I’m told) from a 360. It has part number 4323352 in the casting.

View attachment 1715905223

I went to put the AC pump back on but I am missing the bracket on the drivers side. It’s triangular shape. It connects to two lower bolts on the AC pump (circled in red) and one bolt in the intake manifold (circled in yellow). On my original 2-barrel intake, there is about an inch raised boss (instead of a what looks like a capped hole) where this triangular shaped bracket attached.

View attachment 1715905224 View attachment 1715905225


1. Can anyone give me info on the manifold?
2. Does anyone have the correct AC bracket for an RV2 pump and this intake manifold?

As always, thanks for your help

There isn’t a correct bracket for that intake as they never used a rv2 with it. Only the sanden. U will have to fabricate a bracket. Kim