Is this LA360 XE268 cam kit deal good for my combo?

-
Joe, I have that cam in a 360 W/.039 Head gaskets, eddy heads ootb in a dart. Stock converter, short tire. .Rusty's right 165ish cyl pressure. Pulls right off idle. Hope this helps
 
Black Girl said:
Joe, I have that cam in a 360 W/.039 Head gaskets, eddy heads ootb in a dart. Stock converter, short tire. .Rusty's right 165ish cyl pressure. Pulls right off idle. Hope this helps
Click to expand...
Wow. That's nice cylinder pressure. Just doing a comparison to my mill in my head. Those cylinder heads have 63cc advertised volume (vs my milled 72cc) but you are using a thicker head gasket .039 vs .028). Are you running stock pistons? Did you install that cam advanced? Thank you.
 
Its a stock 76 short block, I bore scoped it when I checked the pressures. (dish pistons) I didn't install the cam, po gave me the cam card when I bought the car. It does run out of steam about 4800-5000 but gets there quick.
 
You must log in or register to reply here.
-

Back
Top