Is your 67-76 A-body windshield leaking ?

[Oldmanmopar]

Check here. You can reach it in the car without removing the windshield. Not easy but can be done by someone with little arms and Belly.

Watch the video

 

[swedefish]

Thanks for posting,

 

[JDMopar]

Thanks Steve. I learned something new today!

 

[GY3 WEDGE]

Deffinetly something to watch when removing glass .nice video!

 

[pweiss]

Check here. You can reach it in the car without removing the windshield. Not easy but can be done by someone with little arms and Belly.

Watch the video

Appreciate the video, but that hole area you are referring is in no way connected to the square hole cowl drain. Thats a completely separate piece spot welded on. packing it with dum dum does absolutely nothing for a leak.

 

[340sFastback]

Most of times glass shops fill drain holes with sealant which can prevent draining.

 

[RustyRatRod]

@67Dart273

 

[WhodatReggie]

I need an explanation. Does the leaking really stop with dum dum pressed into the little bracket at the end of the straw shown in the video? Assuming no rust out in the trough. I've got a 67 Barracuda that leaks in the front windshield mainly on drivers side. Car has good rubberstrip. What does anyone say?

 

[WhodatReggie]

I guess nobody knows....I am shocked someone has not said anything.

 

[Oldmanmopar]

I have a leaker we are going to fix shortly I will post a new video when we fix it.

 

[WhodatReggie]

that works for me...

 

[67Dart273]

I have a leaker we are going to fix shortly I will post a new video when we fix it.

Steve, my friend, you need to write that book!!! LOL

 

[Kendog 170]

I was told to use this for leaking windshield gaskets. Doesn't harden. Put it in the gasket grooves before installing. Gets messy so have rags and wax and grease remover. Still haven't done it but did buy it.

 

[Billybryson54]

The video is no longer available here...is there somewhere else it can be viewed?