[WANTED] ISO .30 over 360 flat top pistons

[84roadster]

I am trying to build up a 85 360 block motor and pick up the compression so I can run a better cam. Looking for a cam also.

 

[pauly]

I may have a lead for you. Trying to get ahold of the guy for you.

 

[rumblefish360]

Is it possible to be any more vague?

 

[JBurch]

www.uempistons.com

Link to flat top pistons

 

[txstang84]

Is it possible to be any more vague?

Well, it is possible...it would go something like:

I need some new pistons for more compression so I can run a bigger/better cam

 

[thesiren74]

https://m.summitracing.com/parts/slp-h116cp30

 

[70aarcuda]

Speed Pro Chrysler/Dodge 360 Hypereutectic Flat Top 2VR Pistons+MOLY Rings +30 | eBay

 

[84roadster]

Well, it is possible...it would go something like:

I need some new pistons for more compression so I can run a bigger/better cam

Or maybe I am looking for some good used pistons?

 

[txstang84]

But you're still not saying much...just recommending pistons based on a desire for different cam choice is kinda like making investment choices to yield higher returns when you don't know the guy's income. We don't know if you're planning on running a power adder, what heads you're running, what cam...need anyone go on?

That being said, the recommendation before your last reply is a good one. They're close to the deck and should yield plenty of compression. If you want used, check the classifieds, post up a want ad, and/or check ebay for non-stock pistons.

 

[84roadster]

I am looking for a used set. I want to run pump gas but be able to run a bigger can in it.

 

[408 swinger]

I am looking for a used set. I want to run pump gas but be able to run a bigger can in it.

I have a set of used .030 sealed power hyper's flat top 4 valve relief. I'll check condition and get back to you.