K frame question

dodgem · Jan 25, 2013

I keep seeing different posts about K-frames. Is there more than one type of K-frame in 1966 Darts? Thanks.

abodyjoe · Jan 25, 2013

63-66 abody use the same k-frame for slant 6 or v-8 motors..

here is a good page for k-frame info.. http://www.engine-swaps.com/Pages/TechInfo.html#head3

chryslerfat · Jan 25, 2013

The only difference in the early A K frames was 65 and 66 are drilled for a factory sway bar and 63 and 64 were not.

66fs · Jan 25, 2013

chryslerfat said:
The only difference in the early A K frames was 65 and 66 are drilled for a factory sway bar and 63 and 64 were not.

My "64" Barracuda had the holes for the factory Sway bar.

dogbreath · Jan 25, 2013

NO , 1 k-frame for 6 and v8 engines.

abodyjoe · Jan 25, 2013

dogbreath said:
NO , 1 k-frame for 6 and v8 engines.

63-66 abody use the same k-frame for a slant 6 or v-8 motor..

chryslerfat · Jan 25, 2013

66fs said:
My "64" Barracuda had the holes for the factory Sway bar.

That is interesting as the 64s I have seen and a couple I saved are not drilled but the 65 and 66 ones were.

JDMopar · Jan 25, 2013

Quote:
Originally Posted by dogbreath

NO , 1 k-frame for 6 and v8 engines.

63-66 abody use the same k-frame for a slant 6 or v-8 motor..

Who's on first?

:banghead:

66fs · Jan 26, 2013

It was an original 273, 4 speed car with no factory sway bar. I added the sway bar later. Ma Mopar??? Who can tell.

jw133489 · Jan 26, 2013

chryslerfat said:
That is interesting as the 64s I have seen and a couple I saved are not drilled but the 65 and 66 ones were.

Oddly enough my 66 wasn't drilled for a sway bar. Possibly not the original? Either way, it has a sway bar now