K member jig

[va58]

With a little help from my neighbor's stick welder put together a little jig for the k member to get it up off of the ground for ease of dis-assembly. Sturdy enough but you wouldn't want to tug on it too much.
Will make it a helluva lot easier to break it down and the ability to move it around my garage will be a huge help. Notice two things in those pictures. the welded on torsion bar and the welded on steering coupler. In all my years of messing with Mopars, I have never seen either of these items so frozen in place. the driver side of my car shows much more ground moisture damage than the passenger side.

 

[67cudafb]

Nice job. Must have been alot of fun pulling the k member with the torsion bar sticking out. Might have to put a little heat to get it out.

 

[Old Tired Rebel]

Great idea

 

[grumpuscreature]

Liked it so much I saved the pics so I can make one in future. Thanks for sharing....

 

[va58]

Liked it so much I saved the pics so I can make one in future. Thanks for sharing....

Cool. if you need more pics from another angle, let me know...

 

[Old Tired Rebel]

Cool. if you need more pics from another angle, let me know...

More Pictures would be great.

 

[crackedback]

That's a great HBE piece. I like it!

 

[va58]

Here is one of it before mounting. will take a few more and post.

 

[dmoore]

Nice! Great mobility in the garage for those in the way over 50 crowd!