Last one to post in this thread wins!

-
Driver’s side I think, that’s the side with the low tube not?
Piece of cake! Just disconnect the exhaust, remove the steering linkage, unbolt the motor mounts, remove the steering box, unbolt that sucka, lift the engine 1.5 feet up, and she'll just drop right outta there!
:poke:
 
Last edited:
The company is actually called DUSTLESS BLASTING. if you google it should come up ( U-TUBE). its a turn key business. Similar to a franchise but without the added monthly compensation franchise fees. There are different packages. I think the only catch, is that you have to purchase their media..(it seems)
I looked into this a few years ago but the upfront cost was a lot more than I was willing to invest, plus there are more than a few sandblasting operators in this area already. Market saturation is not far off IMO.
 
Piece of cake! Just disconnect the exhaust, remove the steering linkage, unfortunately the motor mounts, remove the steering box, unbolt that sucka, lift the engine 1.5 feet up, and she'll just drop right outta there!
:poke:
Uh-oh! You used a naughty 4-letter word there:

"Just"
 
Last edited:
I looked into this a few years ago but the upfront cost was a lot more than I was willing to invest, plus there are more than a few sandblasting operators in this area already. Market saturation is not far off IMO.
yup..it is a little pricy...but the populist in our GREATER TORONTO AREA (gta) would make it lucrative in these parts i feel..thanx for the feed back
 
Piece of cake! Just disconnect the exhaust, remove the steering linkage, unfortunately the motor mounts, remove the steering box, unbolt that sucka, lift the engine 1.5 feet up, and she'll just drop right outta there!
:poke:
I know I’ve had that car apart so many times I should put zippers on it.
IMG_1351.gif
IMG_1351.gif
IMG_1351.gif
 
Just finished my most expensive deer hit so far. The prices for these parts are nuts and some of them don't even fit right and that's buying them from the original equipment manufacturer. The air conditioning condenser was nothing like what I took out. I had to modify it and some baffles to make it fit. It cost me $341 to charge the system too. I'm not complaining too bad. I have a happy customer and one killer pay check to start the year. :thumbsup:
 
yup..it is a little pricy...but the populist in our GREATER TORONTO AREA (gta) would make it lucrative in these parts i feel..thanx for the feed back
It still has to make one hell of a mess. Maybe soda would dissolve but sure does mess with the soil Ph. Graffiti removal is another place it could come in handy.
 
It still has to make one hell of a mess. Maybe soda would dissolve but sure does mess with the soil Ph. Graffiti removal is another place it could come in handy.
Be very careful when removing Graffiti from limestone, it is very soft, surface damage will occur. Then you’ll have to do the whole wall to make it all look the same.
 
Be very careful when removing Graffiti from limestone, it is very soft, surface damage will occur. Then you’ll have to do the whole wall to make it all look the same.
I was just thinking that too. Maybe it could be blended like paint. LOL
 
I was just thinking that too. Maybe it could be blended like paint. LOL
A customer once came to me and said he spilled a cup of coffee on his limestone hearthstone. I told him I’m not promising anything but I’ll try to get the stain out. He went to work and I fought with this stain all morning. Finally stood back and looked at it. Went to his kitchen made a pot of coffee and stained the whole thing. He came home and was flabbergasted couldn’t believe it. Payed me all is good never told him what I did.
 
A customer once came to me and said he spilled a cup of coffee on his limestone hearthstone. I told him I’m not promising anything but I’ll try to get the stain out. He went to work and I fought with this stain all morning. Finally stood back and looked at it. Went to his kitchen made a pot of coffee and stained the whole thing. He came home and was flabbergasted couldn’t believe it. Payed me all is good never told him what I did.
That's good old CANADIAN ingenuity.
 
Be very careful when removing Graffiti from limestone, it is very soft, surface damage will occur. Then you’ll have to do the whole wall to make it all look the same.
duly noted. I'd have to start off with small projects, and work my way up to auto's and motorcycle frames. I'm in with guys that restore old bikes and since we are all up there in age, furniture now... lol
 
They moved my son to a minimum-security prison a few days ago and today the parole board meets to figure out when to let him out.
I'm pretty stressed out right now.
 
They moved my son to a minimum-security prison a few days ago and today the parole board meets to figure out when to let him out.
I'm pretty stressed out right now.
I feel for ya pal, the stress is probably coming from the fact there’s not much you can do to help the situation. And waiting is one of the hardest jobs there is. Take it cool pal we got your back.
 
I feel for ya pal, the stress is probably coming from the fact there’s not much you can do to help the situation. And waiting is one of the hardest jobs there is. Take it cool pal we got your back.
Really appreciate all you guys.
 
They moved my son to a minimum-security prison a few days ago and today the parole board meets to figure out when to let him out.
I'm pretty stressed out right now.
Sounds like a pretty good situation as long as he's on good behavorial terms.
 
-
Back
Top