LCA placement with 1.03 torsion bars

[canajien]

Morning everyone.

I'm getting ready to install some PST 1.03 tbars, the general consensus is the lower control arms should be at ride height, or close to with these tbars.

Should they be slightly higher or lower than ride height for final adjustment?

I'll be swapping the pizza cutter wheel/tires later this week also if that has any affect on the LCA placement.

I currently have 165/70r15 = 24.1" tall, which contributes to making gentle bends "touching cloth" for a set of wider wheels and tires 235/60r15 = 26.1" tall.

thanks!

 

[halifaxhops]

I have mine at the stock height. Just make sure to align it afterwards.

 

[canajien]

Sorry forgot to write should the LCAs be at ride level when installing the tbars, as it seems the factory/stock tbars require LCAs to be hanging down.

At which point the LCAs may not match up to ride level when inserting the tbars, so is it best for them to be a bit higher or lower before putting the weight down to adjust?

However, my plans for the week may have been scuppered by child care duties anyway... So there is now lots of time to think about it.