driver side was leaking again. pulled the axle and inner seal {spring had fallen off the o ring}. Put it back together with new inner seal and flange gaskets. Is there a trick to get these things to seal?
Read other posts were guys ran an inner seal as an added precaution; but the first seal didn't do the trick. so i'm hoping this one will work...running out of ideas here. obtw, I also replaced the breather even though it wasn't clogged.
i'm no mechanic, so any advice would be greatly appreciated
thx
steve
Read other posts were guys ran an inner seal as an added precaution; but the first seal didn't do the trick. so i'm hoping this one will work...running out of ideas here. obtw, I also replaced the breather even though it wasn't clogged.
i'm no mechanic, so any advice would be greatly appreciated
thx
steve