[Found!] Left and Right Transmission to Engine Braces
- Thread starter 65 Dartman
- Start date
-
lemondana
BlackDart
What year is your engine? Somewhere around 75-76 the left side boss on the block was moved forward 1 inch-they started using a slightly longer starter. I think they left the old boss on the block, but it wasn't drilled and tapped. So-the early left brace is shorter than thae later. Passenger side remained the same. Also 904 and 727 used the same braces. I have some tucked away and already painted if I can find them.
I have them 273 to 904 if that is what you are searching for.
yes Sir! That’s what I’m looking for
I “think” the block is a 79 truck block. I need to verify exactly what year it is
JDMopar
Well-Known Member
Don, if your motor and transmission is bolted together, get some measurements between bolt holes on each side and I'll measure the braces I have to see if I can match some up for you. I have some that came off a 318/904 combo if my feeble brain remembers correctly...lol. If you can get measurements, PM them to me so I don't miss it.
Pretty sure I have every style. 10.00 ea plus shipping
Don, if your motor and transmission is bolted together, get some measurements between bolt holes on each side and I'll measure the braces I have to see if I can match some
JD nope, it’s not bolted together; just got the transmission removed from the van and moved into the basement
I “think” it is. That’s what the shop guy thought it was. I just haven’t been able to make time to get to the stirage and check it out
Thank barracudakid
-
