[SOLD] Left over 66-65 cuda exterior parts

-
Status
Not open for further replies.
Could you send me pics of headlight bezels, will buy if they are what I'am looking for. Thanks Henry
 
dartin jack said:
After finishing my restoration of 66 cuda these are some of my left over parts most are 66 & some are 65 as noted I prefer payment from usps international mo or paypal I send by post and the costs are yours but there are no packaging charges thanks fabo for the thread I have pics of all parts but cant shrink them to fit here so pls send e mail address and Ill send pics thanks dartin jack
2 66 front bumper signal light pigtails $10 each
2 L & 1R 66 bumper signal light assemblies complete with lenses $20 each
2 66 rs fender signal light assemblies with good chrome & lights work $40 each
1 66 tailight housing no lenses $20
1 66 tailight reverse housing only $5
2 66 bottom rs tailight lenses $5 each
1 66 bottom ls tailight lense $5
65 R & L complete tailight assemblies driver quality $50
66 front bumper horns $20 for the pair
1 65-66 battery tray with support braces(sand blasted) $20
2 tray support braces $5
2 66 hood safety latches $5 each
4 13" valiant hubcaps 2 good 2 have scrapes $10
2 13" sbp mag hub cap centers $10 valiant emblem
2 L & R 65 forward inner fender splashshields need a little work @ bottom mounting $20 for both
1 LS 66 forward inner splash shield gc $15
65-66 full set of door hinges & mounting bolts $40
1 65-66 wiper transmission $20
3 65-66 door handle to latch (long)rods $5 for all
66 only rf & lr stainless wheel lip mouldings ls need work $25 for both
66 bumper jack mast jack assembly & hook no base $40
3 66 only rocker mouldings $20 each
2 sets hood spring rods $10 each set
2 sets of rear window alum lock strip corners 1 with ribbing $25 the other smooth $20
full set drip rail stainless l &r sides $40
pair of 66 only top rear quarter trim (aluminum) $30 for the pair
1 pair 64-65 top rear quarter trim (stainless) $30
If you need anything else let me know as Im sure i forgot a few things, suprises me more than you thanks again dartin jack
Click to expand...
updated
 
Looking for the part of the door latch that bolts to the body have a 64 valiant conv. I think they are the same
 
dartin jack said:
After finishing my restoration of 66 cuda these are some of my left over parts most are 66 & some are 65 as noted I prefer payment from usps international mo or paypal I send by post and the costs are yours but there are no packaging charges thanks fabo for the thread I have pics of all parts but cant shrink them to fit here so pls send e mail address and Ill send pics thanks dartin jack
4 66 headlight bezels $20 for all 4
2 66 front bumper signal light pigtails $10 each
2 L & 1R 66 bumper signal light assemblies complete with lenses $20 each
2 66 rs fender signal light assemblies with good chrome & lights work $40 each
2 66 bottom rs tailight lenses $5 each
1 66 bottom ls tailight lense $5
65 R & L complete tailight assemblies driver quality $50
66 front bumper horns $20 for the pair
1 65-66 battery tray with support braces $20
2 tray support braces $5
2 66 hood safety latches $5 each
4 13" valiant hubcaps 2 good 2 have scrapes $10
2 13" sbp mag hub cap centers $10 valiant emblem
2 L & R 65 forward inner fender splashshields need a little work @ bottom mounting $20 for both
1 LS 66 forward inner splash shield(sand blasted) gc $15
65-66 full set of door hinges & mounting bolts $40
1 65-66 wiper transmission & motor $20
3 65-66 door handle to latch (long)rods $5 for all
66 bumper jack mast jack assembly & hook no base $40
3 66 only rocker mouldings $20 each
2 sets hood spring rods $10 each set
2 sets of rear window alum lock strip corners 1 with ribbing $25 the other smooth $20
full set drip rail stainless l &r sides $20
1 pair of 66 only top rear quarter trim (aluminum) $20 for the pair
1 pair 64-65 top rear quarter trim (stainless) $20 for the pair
If you need anything else let me know as Im sure i forgot a few things, suprises me more than you thanks again dartin jack
Click to expand...
updated to remove sold parts
 
Jack i replied on your interior post as well, I am interested in the 65 tailights, pm me if they are available, if you can drop me a pic of them.
 
dartin jack said:
After finishing my restoration of 66 cuda these are some of my left over parts most are 66 & some are 65 as noted I prefer payment from usps international mo or paypal I send by post and the costs are yours but there are no packaging charges thanks fabo for the thread I have pics of all parts but cant shrink them to fit here so pls send e mail address and Ill send pics thanks dartin jack
4 66 headlight bezels $10 each
2 66 front bumper signal/fender light pigtails $10 each
2 L & 1R 66 bumper signal light assemblies complete with lenses $20 each
1 66 rs fender signal light housing good for rechroming $15
1 66 tailight housing no lenses $20
1 66 tailight reverse housing only $5
66 front bumper horns $20 for the pair
1 65-66 battery tray with support braces $20 2 battery tray support braces $5
2 66 hood safety latches $5 each
4 13" valiant hubcaps 2 good 2 have scrapes $10
2 13" sbp mag hub cap centers $10 valiant emblem
2 L & R 65 forward inner fender splashshields need a little work @ bottom mounting $20 for both
1 LS 66 forward inner splash shield gc $15
65-66 full set of door hinges & mounting bolts $40
1 65-66 wiper transmission & motor
3 65-66 door handle to latch (long)rods $5 for all
66 bumper jack mast jack assembly & hook no base $40
3 66 only rocker mouldings $20 each
2 sets hood spring rods $10 each set
2 sets of rear window alum lock strip corners 1 with ribbing $25 the other smooth $20
full set drip rail stainless l &r sides $30
1 pair of 66 only top rear quarter trim (aluminum) $30
1 pair 64-65 top rear quarter trim (stainless) $30

If you need anything else let me know as Im sure i forgot a few things, suprises me more than you thanks again dartin jack
Click to expand...
updated to remove sold parts
 
dartin jack said:
After finishing my restoration of 66 cuda these are some of my left over parts most are 66 & some are 65 as noted I prefer payment from usps international mo or paypal I send by post and the costs are yours but there are no packaging charges thanks fabo for the thread I have pics of all parts but cant shrink them to fit here so pls send e mail address and Ill send pics thanks dartin jack
2 66 front bumper signal light pigtails $10 each
1 66 rs fender signal light housing only for rechroming $20
1 66 tailight housing no lenses $20
1 66 tailight reverse housing only $5
66 front bumper bumperets $20 for the pair
1 65-66 battery tray with support braces $20
2 tray support braces $5
2 66 hood safety latches $5 each
4 13" valiant hubcaps 2 good 2 have scrapes $10
2 13" sbp mag hub cap centers $10 valiant emblem
2 L & R 65 forward inner fender splashshields need a little work @ bottom mounting $20 for both
1 LS 66 forward inner splash shield gc $15
65-66 full set of door hinges & mounting bolts $40
1 65-66 wiper transmission & motor $40
3 65-66 door handle to latch (long)rods $5 for all
66 bumper jack mast jack assembly & hook no base $40
3 66 only rocker mouldings $20 each
2 sets hood spring rods $10 each set
2 sets of rear window alum lock strip corners 1 with ribbing $25 the other smooth $20
full set drip rail stainless l &r sides $40
pair of 66 only top rear quarter trim (aluminum) $30 for the pair
1 pair 64-65 top rear quarter trim (stainless) $30
If you need anything else let me know as Im sure i forgot a few things, suprises me more than you thanks again dartin jack
Click to expand...
updated to remove sold parts
 
Let's see......I want several things.....
Left Rear wheel lip stainless moulding.....please discribe the condition or send picture
Are the 66 headlight bezels the same from side to side? IDK....I need the passenger side so I'd like the good one....but will buy a set with the good one included
do you still have the front bumper horns? want'em if you do
looking for many other parts......Please send pics and I'll respond with additional requests......thanks
 
dartin jack said:
After finishing my restoration of 66 cuda these are some of my left over parts most are 66 & some are 65 as noted I prefer payment from usps international mo or paypal I send by post and the costs are yours but there are no packaging charges thanks fabo for the thread I have pics of all parts but cant shrink them to fit here so pls send e mail address and Ill send pics thanks dartin jack
2 66 front bumper signal light pigtails $10 each
2 L & 1R 66 bumper signal light assemblies complete with lenses $20 each
1 66 rs fender signal light housing only great chrome $40
1 66 tailight housing with reverse housing no lenses $25
66 front bumper horns $20 for the pair
1 65-66 battery trays with support braces $20
2 tray support braces $5
2 66 hood safety latches $5 each
4 13" valiant hubcaps 2 good 2 have scrapes $10
1 13" sbp mag hub cap center $10 valiant emblem
2 L & R 65 forward inner fender splashshields need a little work @ bottom mounting $20 for both
1 LS 66 forward inner splash shield gc $15
65-66 full set of door hinges & mounting bolts $40
65-66 wiper transmission & motor $20
3 65-66 door handle to latch (long)rods $5 for all
66 bumper jack mast jack assembly & hook no base $40
3 66 only rocker mouldings $20 each
2 sets hood spring rods $10 each set
2 sets of rear window alum lock strip corners 1 with ribbing $25 the other smooth $20
full set drip rail stainless l &r sides $40
pair of 66 only top rear quarter trim (aluminum) $30 for the pair
pair 64-65 top rear quarter trim (stainless) $30 for the pair
64-66 full set of plymouth trunk & hood letters with nuts the m is trunk only & the p has little pitting the rest have none they do need paint touchup $50 for the set
64-66 plymouth trunk & hood letters driver quality all but the m available $5 each
65-66 l&r fender barracuda name plates 1 centre pin missing on 1 $30 for the pair
68 l&r fender barracuda name plates very good quality with overspray on edges only $40 for the pair
If you need anything else let me know as Im sure i forgot a few things, suprises me more than you thanks again dartin jack
Click to expand...
updated to remove sold parts thanks fabo
 
dartin jack said:
After finishing my restoration of 66 cuda these are some of my left over parts most are 66 & some are 65 as noted I prefer payment from usps international mo or paypal I send by post and the costs are yours but there are no packaging charges thanks fabo for the thread I have pics of all parts but cant shrink them to fit here so pls send e mail address and Ill send pics thanks dartin jack
2 66 front bumper signal light pigtails $10 each
2 L & 1R 66 bumper signal light assemblies complete with lenses $20 each
1 66 rs fender signal light housing with great chrome $25
1 66 tailight housing with reverse housing no lenses $25
1 65-66 battery tray with support braces $20
2 tray support braces $5
2 66 hood safety latches $5 each
2 13" sbp mag hub cap centers $10 valiant emblem
1 65-66 washer nozzle $5
2 L & R 65 forward inner fender splashshields need a little work @ bottom mounting $20 for both
1 LS 66 forward inner splash shield gc $15
65-66 full set of door hinges & mounting bolts $40
2 65-66 wiper transmissions & motors $20
3 65-66 door handle to latch (long)rods $5 for all
66 bumper jack mast jack assembly & hook no base $40
3 66 only rocker mouldings $20 each
2 sets hood spring rods $10 each set
2 sets of rear window alum lock strip corners 1 set with ribbing $25 the other smooth $20
full set drip rail stainless l &r sides $40
pair of 66 only top rear quarter trim (aluminum) $30 for the pair
1 pair 64-65 top rear quarter trim (stainless) $30
plymouth trunk & hood letters with good posts and no pitting $10 each

If you need anything else let me know as Im sure i forgot a few things, suprises me more than you thanks again dartin jack
Click to expand...
updated to remove sold parts thanks fabo
 
dartin jack said:
After finishing my restoration of 66 cuda these are some of my left over parts most are 66 & some are 65 as noted I prefer payment from usps international mo or paypal I send by post and the costs are yours but there are no packaging charges thanks fabo for the thread I have pics of all parts but cant shrink them to fit here so pls send e mail address and Ill send pics thanks dartin jack
2 66 front bumper signal light pigtails $10 for both
1set L & R 66 bumper signal light assemblies complete with lenses $20 for the set
1 LS 66 bumper signal light assembly with lense $10
1 66 rs fender signal light housing only great chrome $20
1 66 tailight housing complete no lenses $20
2 66 bottom rs tailight lenses $10 for both
1 66 bottom ls tailight lense $5
1 65-66 battery tray with support braces $15
2 tray support braces $5
2 66 hood safety latches $5 each
2 13" sbp mag hub cap centers $10 valiant emblem
1 65-66 washer nozzle $5
2 L & R 65 forward inner fender splashshields need a little work @ bottom mounting $20 for both
1 LS 66 forward inner splash shield gc $15
65-66 full set of door hinges & mounting bolts $30
2 65-66 wiper transmissions & motors $15 each
3 65-66 door handle to latch (long)rods $5 for all
66 bumper jack mast jack assembly & hook no base $30
3 66 only rocker mouldings $20 for all 3
2 sets hood spring rods $10 each set
2 sets of rear window alum lock strip corners 1 with ribbing $20 the other smooth $10
full set drip rail stainless l &r sides $20
pair of 66 only top rear quarter trim (aluminum) $20 for the pair
2 pair 64-65 top rear quarter trim (stainless) $20 each pair
trunk lid letters with good studs & no pitting $8 each
If you need anything else let me know as Im sure i forgot a few things, suprises me more than you thanks again dartin jack
Click to expand...
updated to drop prices
 
Hiya Jack:

Interested in the taillight housing & lenses, battery tray/braces, as well as the 66 top rear quarter trim set. Will send a PM.

thanks!,
kbb
 
dartin jack said:
After finishing my restoration of 66 cuda these are some of my left over parts most are 66 & some are 65 as noted I prefer payment from usps international mo or paypal I send by post and the costs are yours but there are no packaging charges thanks fabo for the thread I have pics of all parts but cant shrink them to fit here so pls send e mail address and Ill send pics thanks dartin jack
2 L & 1R 66 bumper signal light assemblies complete with lenses $20 each
2 battery tray support braces $5
2 66 hood safety latches $5 each
2 13" sbp mag hub cap centers $10 valiant emblem
1 65-66 washer nozzle $5
2 L & R 65 forward inner fender splashshields need a little work @ bottom mounting $20 for both
1 LS 66 forward inner splash shield gc $15
65-66 full set of door hinges & mounting bolts $30
2 65-66 wiper transmissions & motors $20
3 65-66 door handle to latch (long)rods $5 for all
66 bumper jack mast jack assembly & hook no base $40
3 66 only rocker mouldings $20 each
2 sets hood spring rods $10 each set
2 sets of rear window alum lock strip corners 1 with ribbing $20 the other smooth $10
full set drip rail stainless l &r sides $20
1 pair 64-65 top rear quarter trim (stainless) $20 each pair
trunk lid letters with good studs no pitting $8 each

If you need anything else let me know as Im sure i forgot a few things, suprises me more than you thanks again dartin jack
Click to expand...
updated to remove sold parts
 
dartin jack said:
After finishing my restoration of 66 cuda these are some of my left over parts most are 66 & some are 65 as noted I prefer payment from usps international mo or paypal I send by post and the costs are yours but there are no packaging charges thanks fabo for the thread I have pics of all parts but cant shrink them to fit here so pls send e mail address and Ill send pics thanks dartin jack

2R & 1L 66 bumper signal light assemblies complete with lense $20 each
2 battery tray support braces $5
2 66 hood safety latch $5
2 13" sbp mag hub cap centers $10 valiant emblem
1 65-66 washer nozzle $5
2 L & R 65 forward inner fender splashshields need a little work @ bottom mounting $20 for both
1 LS 66 forward inner splash shield gc $15
65-66 full set of door hinges & mounting bolts $40
2 65-66 wiper transmissions & motors $20
3 65-66 door handle to latch (long)rods $5 for all
66 bumper jack mast jack assembly & hook no base $40
3 66 only rocker mouldings $20 each
2 sets hood spring rods $10 each set
2 sets of rear window alum lock strip corners 1 with ribbing $20 the other smooth $10
full set drip rail stainless l &r sides $40
1 Pair 64-65 top reaer quarter trim (stainless) $20
console shifter bracket for the 904 mounts to the tranny $15
trunk lid/hood letters with good studs no pitting $8 each

If you need anything else let me know as Im sure i forgot a few things, suprises me more than you thanks again dartin jack
Click to expand...
updated to remove sold parts thanks fabo
 
dartin jack said:
After finishing my restoration of 66 cuda these are some of my left over parts most are 66 & some are 65 as noted I prefer payment from usps international mo or paypal I send by post and the costs are yours but there are no packaging charges thanks fabo for the thread I have pics of all parts but cant shrink them to fit here so pls send e mail address and Ill send pics thanks dartin jack

1 L 66 bumper signal light assembly complete with lense $20
2 battery tray support braces $5 for the pair
66 hood safety latches $5
2 13" sbp mag hub cap centers $10 valiant emblem
1 65-66 washer nozzle $5
2 L & R 65 forward inner fender splashshields need a little work @ bottom mounting $20 for both
1 LS 66 forward inner splash shield gc $15
65-66 full set of door hinges & mounting bolts $40
2 65-66 wiper transmissions & motors $20 each
3 65-66 door handle to latch (long)rods $5 for all
66 bumper jack mast jack assembly & hook no base $40
3 66 only rocker mouldings $20 each
2 sets hood spring rods $10 each set
2 sets of rear window alum lock strip corners 1 with ribbing $20 the other smooth $10
full set drip rail stainless l &r sides $40
65 plymouth trunk lid letters & also for 66 trunk & hood with good studs no pitting $5 each

If you need anything else let me know as Im sure i forgot a few things, suprises me more than you thanks again dartin jack
Click to expand...

updated to remove sold parts thanks fabo
 
dartin jack said:
After finishing my restoration of 66 cuda these are some of my left over parts most are 66 & some are 65 as noted I prefer payment from usps international mo or paypal I send by post and the costs are yours but there are no packaging charges thanks fabo for the thread I have pics of all parts but cant shrink them to fit here so pls send e mail address and Ill send pics thanks dartin jack
1 Left 66 bumper signal light assembly complete with lense $20
1 66 tailight reverse housing only $5
2 tray support braces $5
2 66 hood safety latches $5 each
3 64 65 stainless 13" valiant hubcaps very good condition $20
2 13" sbp mag hub cap centers $10 valiant emblem
2 65-66 washer nozzle $5 each
2 L & R 65 forward inner fender splashshields need a little work @ bottom mounting $20 for both
1 LS 66 forward inner splash shield gc $15
65-66 full set of door hinges & mounting bolts $40
1 65-66 wiper transmission & motor $20
3 65-66 door handle to latch (long)rods $5 for all
both rr & lr 65 stainless wheel lip mouldings $40
66 bumper jack mast jack assembly & hook no base $40
3 66 only rocker mouldings $20 for the 3
2 sets hood spring rods $10 each set
2 sets of rear window alum lock strip corners 1 with ribbing $25 the other smooth $20
full set drip rail stainless l &r sides $20


If you need anything else let me know as Im sure i forgot a few things, suprises me more than you thanks again dartin jack
Click to expand...
updated to remove sold parts
 
john u still got the 65 tail light assem. does it have lenses rear backup lenses needed if any 1 reads this and has them if john doesnt will buy whole assembly if reverse lights good
 
Status
Not open for further replies.
-

Back
Top