Rice Nuker
Let the Coal Roll!
I fabricated a rail from four 3" x13" angle iron and then welded chains on each corner and a a number of holes down the rail. Bolted the chains to 4 corner intake bolts with grade 8. Worked fine. Had the big haussy neighbor kid there for heavy liftin.
Took a solid 2 hours. The motor mounts have locating pins are sandwitched on angled frame perches. Had to "snap" the motor into the frame cradle by compressing the motor mount rubber in various ways.
Took a solid 2 hours. The motor mounts have locating pins are sandwitched on angled frame perches. Had to "snap" the motor into the frame cradle by compressing the motor mount rubber in various ways.
Attachments
-
20140718083217156_UTC-07.jpg65 KB · Views: 186
-
20140718101029849_UTC-07.jpg59.3 KB · Views: 165
-
20140718095240394_UTC-07.jpg61.4 KB · Views: 171
-
20140718095018796_UTC-07.jpg63.6 KB · Views: 171
-
20140718095014196_UTC-07.jpg63.2 KB · Views: 171
-
20140718093644191_UTC-07.jpg60.2 KB · Views: 169
-
20140718090217139_UTC-07.jpg62.6 KB · Views: 179
-
20140718084644051_UTC-07.jpg62.7 KB · Views: 173
-
20140718083757017_UTC-07.jpg63.8 KB · Views: 175
-
20140718083449944_UTC-07.jpg64.1 KB · Views: 184