Looking for photos

[Heywodja]

Need help…Looking for photos of a small block in the car without an intake installed but hopefully with a distributor installed.

I need this so we can locate a position for a wiring harness pass through in the fire wall.

my engine is out of the car due to some firewall work we are performing and I just need some reference for placing the opening.

 

[crackedback]

Best I got. The pass side cap edge on the distributor is slightly to the pass side that upper wiper motor mount stud.

 

[Rocket]

Not exactly what you are looking for but hope this helps. 69 Barracuda.

 

[Heywodja]

Best I got. The pass side cap edge on the distributor is slightly to the pass side that upper wiper motor mount stud.

I am putting my coil in the engine compartment and running the coil like you did.

Also putting the ECU and relays for fuel pump and electric fan in there too.

I am finally getting around to using the battery relocation kit you made me, lol

Thanks and Happy Holidays bro!

 

[Heywodja]

Not exactly what you are looking for but hope this helps. 69 Barracuda.

View attachment 1716339767View attachment 1716339768View attachment 1716339769

Thanks this helps very much!

Happy Holidays!

 

[Heywodja]

Inside plate I built to mount the electrical stuff.

 

[crackedback]

Looks kind of familiar... LOL Mounted where the heater box would go. Used the AC openings to pass the coil wire oil pressure gauge line.

 

[65 Cuda 340]

W/O intake or distributor. 67 Barracuda.

 

[rowinafour]

No distributor but may give you an idea.

 

[Heywodja]

Thanks everyone, project moving forward again!

 

[Heywodja]

No distributor but may give you an idea.

View attachment 1716339844

The drivers side lifter bores lined it up perfectly!