Looking for tubular control arms with extra caster

[donsscooters]

I found some info on this site before but after several searches, I can't locate it again. I need some tubular upper control arms for a Duster drag car project and I know someone used to offer some with an extra 2 degrees built in. After converting mine to coil-overs I can't get more than one degree without cutting the uppers and rewelding them. (I will do it if I have to) Some new arms would solve that and make removing the shocks a lot easier if the arms had adjustable rod ends that could be unbolted. I didn't see what I want on Magnums or Bob's web sites but i have not called yet. Thanks in advance, Don

 

[mopardude318]

http://www.reillymotorsports.com/store/product.php?productid=16164&cat=265&page=1

 

[crackedback]

Check out member Badart's stuff - Dillinger Chassis

http://www.dillingerchassis.com/product/adjustable-upper-control-arms/

 

[donsscooters]

Wow! Thanks for the fast replys. I got 'em ordered and now calling my buddy to find a reamer to enlarge my spindle. A million thanks guys. Don

 

[70aarcuda]

http://www.dillingerchassis.com/product/small-ball-joint-a-body-adjustable-upper-control-arms/

Dillinger has them for the small ball joints too

 

[abodyjoe]

http://www.reillymotorsports.com/store/product.php?productid=16164&cat=265&page=1

good stuff right there..

 

[younggun2.0]

good stuff right there..

yes, the RMS stuff is top shelf. I have there upper arms and strut rods with the heim joints and i can't believe how much it free'd up the suspension movement. it eliminated alot of slop in the front end and gave me infinite adjust-ability.