Lower Control Arm bushings? 67 cuda convertible!

[jman67cudaconv]

I'm doing a nut and bolt restoration on a 67 Cuda conv. with a 273. Should I use the polygraphite bushing for the lower control arms or the original oem rubber kind? and why?! thanks

 

[mopardude318]

Use the standard oem rubber for the lower control arm bushing...Usually when you use the poly lower bushings, they slide out when you try to press the lca pivot pin in...

 

[Rick@Laysons]

FWIW, you might want to find a part store that sells "MOOG" brand lower control arm bushings and use those, they are a very high quality piece and will last for years.

 

[GeorgeGerhard]

Use the Moog as Rick stated