magnum 360 pushrod lash

-
E

Eric Mulay

Well-Known Member
Joined
Dec 23, 2019
Messages
46
Reaction score
3
Location
san luis obispo california
i just changed a cam and lifters, when i put the rocker arms back on, its 1 on the rocker arm, do i just tighten that all the way down?

i cant find any instructions except for GM lash,. but GM has a rocker stud and these do not, so its not the same
 
Eric Mulay said:
i just changed a cam and lifters, when i put the rocker arms back on, its 1 on the rocker arm, do i just tighten that all the way down?

i cant find any instructions except for GM lash,. but GM has a rocker stud and these do not, so its not the same
Click to expand...
Hydraulic lifters?

Jake
 
Eric Mulay said:
so, there is no lash adjustment like on chevy heads?
Click to expand...

A bit late to the party, but no lash settings on a Magnum Mopar but rocker geometry is a thing if you changed heads or head gasket thickness.
In case you were wondering if I have any direct experience with it.:D

Motor.jpg


MagnumswapLA.jpg
 
DO they have the 5/16" bolts that hold the rockers down? If so, they torque to 15-17 LB FT. They are non-adjustable. However, pictures of what YOU have would assure that we are giving you correct advice.
 
You must log in or register to reply here.
-

Back
Top