[FOR SALE] Magnum Parts 360 and 408 rotating assemblies.

-
T

thomasfouraker

Well-Known Member
Joined
Feb 2, 2020
Messages
150
Reaction score
50
Location
Jacksonville
Rating - 100%
1   0   0
Contact seller
Located just outside of Jacksonville Florida

360 Rotating Assembly
Have a set of factory rods with factory crank and a set of Keith Black 107 .030 pistons. Has been internally balanced.
Have paperwork for everything.
$400


408 Rotating Assembly
Scat Forged Crankshaft. Has approx. 5,000 miles on crank and pistons.
SB-Chrysler-360-4340-Forged-SW

Icon 745.030 Pistons with approx. 5,000 miles on them.
ICON 745.030

NEW Eagle Forged H-Beam Rods
Part# CRS-6123C3D2000

NEW Speed Pro Plasma Moly Piston Ring set.
R-9902 30

Entire assembly was balanced. Have paperwork to show balancing and weights. Was going to boost so original I Beams were replaced with H Beams and the entire assembly was rebalanced but abandoned the project before it was reassembled. Over $3000 invested in the parts and balancing. Will make for a very nice street build.
$1600

Prices are OBO. Willing to meet in SE if deposit is made. I know cranks are heavy to ship.
 
Pictures factory 360 crank not pictured.



IMG_6552.jpeg


IMG_6553.jpeg


IMG_6554.jpeg


IMG_7328.jpeg


IMG_7329.jpeg


IMG_7330.jpeg


IMG_7331.jpeg


IMG_7332.jpeg


IMG_7333.jpeg
 
Last edited:
Will the magnum rods and pistons work in a LA 360? If so would you sell just the rods and pistons and ship them? I would use the crank but the shipping is likely more than I could get my crank ground for.

Thanks Jim
 
Jim Ward said:
Will the magnum rods and pistons work in a LA 360? If so would you sell just the rods and pistons and ship them? I would use the crank but the shipping is likely more than I could get my crank ground for.

Thanks Jim
Click to expand...
Jim, I would sell just the piston and rods but I dont think Id lower the price much. I really would like to keep it together if possible since it was already balanced as an assembly and weight added to the crank. They should work fine in an LA though.
 
Jim Ward said:
Will the magnum rods and pistons work in a LA 360? If so would you sell just the rods and pistons and ship them? I would use the crank but the shipping is likely more than I could get my crank ground for.

Thanks Jim
Click to expand...
Sounds opposite of what I was asking in a thread here in the magnum engine section...
And neutral balancing a 360 was the start of it
..
 
Jim Ward said:
Will the magnum rods and pistons work in a LA 360? If so would you sell just the rods and pistons and ship them? I would use the crank but the shipping is likely more than I could get my crank ground for.

Thanks Jim
Click to expand...
But then you'd have to get it balanced to match this combo...I just wish it was closer or else someone was heading this way from down there to save the shipping costs... The thought of what shipping would cost killed my interest unfortunately but it's exactly what I wanted for my build otherwise.
 
You must log in or register to reply here.
-

Back
Top