Making a little progress on the W5 engine for the Dakota

-

tvt59

FABO Gold Member
FABO Gold Member
Joined
Nov 6, 2004
Messages
463
Reaction score
817
My son did this intake for the W5 engine with EFI.

123_1.jpeg
 
When you get a chance, please post one more picture from the front looking downward at an angle. A view that's like looking at it in the engine compartment.
 
When you get a chance, please post one more picture from the front looking downward at an angle. A view that's like looking at it in the engine compartment.
I didn't get s chance to do that before he sent it off to Brett.
 
I'ts N/A 2.125" intake. 14.8 to 1 compression
 
Last edited:
This is the cam we're using. With 1.7 rockers

output_im.JPG
 
Last edited:
Is this in a Gen 2 Dakota? Which headers are you going to use?

I just got on the TTI list for long tube 1.75" primary tubes. These are the ones that originated from John's specs at Southeast Performance.

 
Yes sir 2001. I bought a kit from Stainless Steel Headers. 2" primary and 4" collector to make the headers for it.

20240902_104852.jpg
 
-
Back
Top