"Dart67"
Well-Known Member
Over the past five years I have been slowly working on my "Man Cave" and Ham Shack".
It all started out With me removing the support columns form under this I-Beam and then lowering the I-beam almost 8 feet.
The columns and I-beam are 3/8" x 5 1/2" x 16". The columns are 15 feet tall. The I-beam is just shy of 28 feet long.
Once I had the I-beam lowered and tied in to the structure, I started to build.
My build has been interrupted a few times by a hip replacement and a lost summer due to a miss diagnosed heart problem that was not a problem.
Over the last two and a half weeks I have made a lot of progress.
Here are a few photos of the progress from the start to where I am today.
The room is 8ft x 8ft x 27 ft and will be the home of all my deer hunting and car memorabilia as well as my Ham radio shack.
I am planing to paint a large blue MOPAR "M" logo between the windows and "MOPAR or NO Car" below it.
On the left side I may put the new Dodge logo and on the right a RAM logo.
Herb
It all started out With me removing the support columns form under this I-Beam and then lowering the I-beam almost 8 feet.
The columns and I-beam are 3/8" x 5 1/2" x 16". The columns are 15 feet tall. The I-beam is just shy of 28 feet long.
Once I had the I-beam lowered and tied in to the structure, I started to build.
My build has been interrupted a few times by a hip replacement and a lost summer due to a miss diagnosed heart problem that was not a problem.
Over the last two and a half weeks I have made a lot of progress.
Here are a few photos of the progress from the start to where I am today.
The room is 8ft x 8ft x 27 ft and will be the home of all my deer hunting and car memorabilia as well as my Ham radio shack.
I am planing to paint a large blue MOPAR "M" logo between the windows and "MOPAR or NO Car" below it.
On the left side I may put the new Dodge logo and on the right a RAM logo.
Herb