Manifolds useable or junk?

[Saetun]

I picked up a set of 318 exhaust manifolds locally to replace the stock manifolds off of 73 swinger because the stock setup has that ugly stovepipe connection to the air cleaner. The manifolds I picked up are stamped '67 & are correct for a 318 but am unsure of the compatibility. Furthermore there is some wear through on one of the mounting holes. Take a look & let me know if these should be junked or if they are useable.

~Sae

 

[1wild&crazyguy]

it will work, use a hardened washer on the end.

could even use one of those coned looking slant int/exhaust nuts.

 

[Saetun]

Sweet. Thx for the good news!