Manual foot pedals to automatic foot pedals?

[rr4406pak]

I've got a 69' Swinger that has the 3 pedals for the use of a manual transmission.
I'm converting the car to a floor shift automatic transmission.
Is it possible to swap out my manual 3 pedals for an auto trans 2 pedal setup?
Also, are the different pedal setups master cylinder specific?
Thanks.

 

[Mtrhead]

If you want to swap automatic parts for your manual parts I'm interested in what you're taking out and will pay cash and have the parts you need...

 

[Mtrhead]

But yeah back to your question just put the automatic stuff with the auto push rod and your same master cylinder will work

 

[rr4406pak]

Do the old pedals just unbolt out as one big unit and you bolt in the new unit? Pedals and all?

 

[Mtrhead]

Yes sir

 

[Daves69]

.............I'm converting the car to a floor shift automatic transmission.
Is it possible to swap out my manual 3 pedals for an auto trans 2 pedal setup?.............

I ran an automatic with a cable shift in my 4spd '69 for a couple years. All I did was let the O-C spring hold the clutch pedal to the floor.
Was glad I didn't pull the peddle out as I decided to go back to 4spd.

 

[Kendog 170]

Also, your pedal assembly also holds your Master cylinder to your firewall.