[WANTED] master cylinder push rod

-
Status
Not open for further replies.
Is this a Midland?
44DC0049-6504-43A0-B8F2-CD17A1F36212.jpeg
57EA7A4D-9AB3-445E-84A4-7FB02568CB01.jpeg
 
i think that is a 71-72. I have 68 disc brake i think its a dual diaphragm. a couple pics of the brackets would be great. I am also looking for the clevis pin that connects the booster rod to linkage. any additional info would be appreciated
 
It is for disc brakes and it is on a 72’ Dart that originally had the Kelsey-Hayes 4 puck disc brakes.
 
I can see what ur saying. But that is a 73 up booster and master cylinder used with big bolt pattern disc brakes. Does it have bbp brakes. U see how that 1 is bolted to the fire wall? Midland has a bracket in between the firewall and the booster. Kim
 
was originally a drum car added 11.75 disc bbp i have a midland 7.5 inch for disc brakes bracket ect. Im just missing the clevis pin and the rod from the booster fell out somewhere. i tried one from a later dart booster but its a little long and I dont think the washer is correct. The one i have looks like harmon part #62-245
 
oldkimmer said:
I can see what ur saying. But that is a 73 up booster and master cylinder used with big bolt pattern disc brakes. Does it have bbp brakes. U see how that 1 is bolted to the fire wall? Midland has a bracket in between the firewall and the booster. Same car.Kim
Click to expand...
297DAB6A-F54A-4211-8089-2C2882BE68A6.jpeg
Those brackets? Between the firewall and the booster?
 
Status
Not open for further replies.
-

Back
Top