[WANTED] METAL WIPER MOTOR GROMMETS NEEDED

-
Status
Not open for further replies.

Troub

67 Dart 270, 225 slant six
Joined
Jul 25, 2018
Messages
641
Reaction score
222
Location
Florida
Rating - 100%
4   0   0
Contact seller
Looking for 2 of the metal wiper motor grommets pictured for my 67 Dart.

C55F1BBD-9EF9-48BB-92DA-805464B24E85.jpeg


694A6D18-1E9B-42FA-A009-775302DB0B13.jpeg
 
Thanks George, that’s the question though…..are those meant as a replacement for the metal ones that I’m missing?

Don't know?

Can you put a 1/2" long piece of 1/4" (or 5/16") brake line in, after you insert the rubber bushings into the wiper motor mount as a Non-compressible sleeve.

Kind of like the way the factory did it, with washers on each side of the rubber bushings?


☆☆☆☆☆
 
Don't know?

Can you put a 1/2" long piece of 1/4" (or 5/16") brake line in, after you insert the rubber bushings into the wiper motor mount as a Non-compressible sleeve.

Kind of like the way the factory did it, with washers on each side of the rubber bushings?


☆☆☆☆☆
Not a bad thought.
 
Status
Not open for further replies.
-
Back
Top