72duster72
Well-Known Member
How much would I gain on mini tubbing a 68 dart. As in tire width and I will not be running a 15 inch rim
Mini tub
- Thread starter 72duster72
- Start date
-
33IMP
Well-Known Member
Kinda depends on if you're gonna move the sprigs too, and how much.
Inertia
Well-Known Member
Mini-tubbed, and spring relocation, - - 295/55/15 drag radials
Last edited:
following
72duster72
Well-Known Member
Yes, I would move the springs
72duster72
Well-Known Member
What size tires are on that dart
Inertia
Well-Known Member
72duster72
Well-Known Member
Thank you
Inertia
Well-Known Member
Here's a coupla links to get you started on a budget.
www.bigblockdart.com
www.bigblockdart.com
Good Luck
Cheers
MOVING WHEELWELLS 101
www.bigblockdart.com
Move Your Springs
www.bigblockdart.com
Good Luck
Cheers
Inertia
Well-Known Member
Very welcome .
72duster72
Well-Known Member
Holy cow I like my car to set a little low. That’s good to know on the backspacing.
72duster72
Well-Known Member
That is one wide tire
72duster72
Well-Known Member
Post a picture if you have it
AJ/FormS
68 Formua-S fastback clone 367/A833/GVod/3.55s
- Joined
- Jan 19, 2014
- Messages
- 25,836
- Reaction score
- 13,142
Op said, "I will NOT NOT be running a 15" rim."
If this means I WILL BE running a 14;
then I see no point cuz what's the biggest 14" street tire you can actually go to the tire-store and put your hands on?
And,
does your combo need more that that?
72duster72
Well-Known Member
Should’ve specified I am not running a 15 inch wheel. I’m more in the autocross and drag racing so probably run an 18 maybe a 20 not sure inch wheel. The other question I have is the a body leafspring relocation kit the same as a b body I know I have one, but I’m not sure for what body style
68dodge
Well-Known Member
I run a 325/50/15 also. I use to run M/T 28x13.50x15 ET Streets. You should have at least 14" of clearance once you mini tub and move the springs in.
-
