Mini tubs- wish they were made for our cars

[draginmopars]

The DSE Mini-Tubs are inner wheel housings designed to accommodate wider tire and wheel packages, including tires as wide as 295

http://www.detroitspeed.com/1962-1967-Chevy-II-products/040404-deep-tubs.html

I can find stock replacements

I'm looking for wide tubs,
will find them after I finish making my stock one wider

 

[AdamR]

Even if someone made wider tubs there is still cutting and welding involved, its just as easy to widen the stock ones.

 

[HemiMark]

The DSE Mini-Tubs are inner wheel housings designed to accommodate wider tire and wheel packages, including tires as wide as 295

http://www.detroitspeed.com/1962-1967-Chevy-II-products/040404-deep-tubs.html

I can find stock replacements

I'm looking for wide tubs,
will find them after I finish making my stock one wider

I used trailer fenders................fit like a glove

 

[jos51700]

55 gallon drums are everywhere.

 

[WAO]

http://store.uscartool.com/Mopar-67-75-A-Body-Mini-Tub-Kit_p_81.html

 

[draginmopars]

55 gallon drums are everywhere.

Let's see how YOU did yours.

Bet they were a Barrel of fun to install

 

[Inertia]

The DSE Mini-Tubs are inner wheel housings designed to accommodate wider tire and wheel packages, including tires as wide as 295

Unless you plan on cutting the frame, I see little to be gained by using after market tubs.. I'd rather just do the standard minitub,, using a 2 - 3 inch strip of sheet metal,, worth may $5.00..

Plenty of threads about min-tubs..

hope it helps..

 

[HemiMark]

Unless you plan on cutting the frame, I see little to be gained by using after market tubs.. I'd rather just do the standard minitub,, using a 2 - 3 inch strip of sheet metal,, worth may $5.00..

Plenty of threads about min-tubs..

hope it helps..

Trailer fenders...........

 

[76orangewagon]

I sent a custom metal shop a blueprint of all the dimensions I wanted and he sent me a set that fit real nice and are made of 16 gauge steel... of course I still had to trim them to fit up but not a bad install, So anything is possible depending on your determination, research and budget.

 

[Clelan]

Does that interfere with your back seat?

 

[76orangewagon]

Does that interfere with your back seat?

I had to do some minor notching in the corners, but it was a very easy fix.

 

[SRT_DSTRHOLC]

Take your time cutting the stock ones out nicely...or you will end up doing CUSTOM tubs like I am now.

 

[pettybludart]

Buy yourself a really good spot weld cutter bit,a sawzall and two 3x50 inch metal strips.Cut out and weld in yourself.I did it to my 66 Dart,working 5hrs a night after work,it took me a week to do it.

 

[Burntorange70]

http://store.uscartool.com/Mopar-67-75-A-Body-Mini-Tub-Kit_p_81.html

You can do it your self for a lot less. http://www.bigblockdart.com/techpages/wells.shtml

 

[Woods74]

Buy yourself a really good spot weld cutter bit,a sawzall and two 3x50 inch metal strips.Cut out and weld in yourself.I did it to my 66 Dart,working 5hrs a night after work,it took me a week to do it.

x2 took me the same amount of time. There's a minitub how-to PDF floating around somewhere in my e-mail if you want it.

 

[davescuda]

I just use my originals and customized them. I am also using my back seat.

 

[DonnieLawson]

I just use my originals and customized them. I am also using my back seat.

My Cuda is still in body shop hell, Its a 68 Fastback, mini tubbed.. I trimmed the back seat bottom so that is fits, easy trim job , but do you have any pics of how you did the back, does it still fold down ?

 

[DonnieLawson]

I need to see how to do my back seat correctly..... I want it to fold down

 

[davescuda]

I got my back seat to fold down but I did not take any picture of the fab work or it installed. Will have to wait till install. Here the rear installed before paint.